Winegard TN-2301, TN-2305, TN-2303 quick start WEP Key Setup, Key Format Hex 10 Characters

Page 15

_In a vehicle environment, grounding to the frame and battery or alternator can reduce static or buzzing during voice calls.

Connect the Ethernet (RJ-45) cable to the Ethernet Port on the TravelNet D/V. (This cable will serve as the connection to your computer or WiFi Router or other network device in most configurations, including the primary Wireless WAN data connection.)

Setting Up WiFi Security on the Edimax BR-6204WG

Refer to the Edimax users guide CD for additional information.

Once you have an internet connection and an unsecure WiFi connection established proceed to setup WiFi security for your Edimax router.

Figure 21

WEP Key Setup

Figure 22

1.Log into the Edimax WiFi Router at 192.168.2.1

2.Enter the Username ‘admin’ and Password ‘1234’

3.Go to WIRELESS SETTINGS > SECURITY

4.Encryption type: select WEP

5.Key Length: 64-bit

6.Key Format: Hex (10 Characters)

7.Default Tx Key: Key 1.

8.Encryption Key 1: Enter your 10 Characters Key- see chart below

9.Do not place an “x” in the selection box labeled “Enable 802.1x Authentication” for normal installations. If there are any questions call TravelNet Technical Support.

Ver. 1.5

 

4/21/2009

- 15 -

Image 15
Contents Parts List TravelNet Data/Voice Cellular Router Installation GuideInstallation Instructions Models TN-2301/TN-2303/TN-2305 Ver 21/2009 Ver 21/2009 Setting up your Carrier Account Setup the TravelNet Data/Voice TerminalVer 21/2009 Install the Battery & Secure the compartment door Attach Phone Cable SIM TravelNet Data/Voice TN-2303 Terminal Setup Ver 21/2009 Proceed to Set Up a Wireless WAN Data Connection Ver 21/2009 Ver 21/2009 Key Format Hex 10 Characters WEP Key SetupParameters Default Description To connect your XP computer to your wireless networkNetwork Authentication, click WEP View and connect to available wireless networksTravelNet Winegard Company Support 877 FAX