Setup Tones | Garmin 130 specification

UNIT OPERATION > RADIO PAGE

Setup Tones

Call Tone—When the Call button is pressed, an attention tone is transmitted. This option allows you to choose one of ten tones.

Roger Tone—When the Talk button is released, a tone is sent to signify the end of the transmission. This option allows you to choose one of four tones, or set the tone to Off.

Ring Tone—When an incoming transmission is received, an attention tone will sound. This option allows you to choose one of ten tones or set the tone to Off. The Ring tone will not sound again until there has been 45 seconds of radio inactivity.

Vibrate—Choose from On or Off to have the unit vibrate when an incoming transmission is received. Once received, the unit will not vibrate again until there has been 45 seconds of radio inactivity.

On/Off Tone—Enable or disable the tone the unit makes when it is turned on and off.

Message Tone—Choose from On or Off to have the unit emit a tone when a message or note is received.

Setup Tones Page

Setup Scanlist

Refer to “Scanning and Monitoring” for complete information about this feature and the options in this page.

Setup Scanlist Page

16	Rino® 130 Owner’s Manual

Image 22

Garmin 130 owner manual Setup Tones

Contents

130 Olathe, Kansas 66062, U.S.A Abbey Park Industrial Estate Introduction Initializing the Rino Using My ID and Symbol Fields Loran TD Format 103 Getting to Know Your Rino Front of the Rino Speaker LCD Display Thumb Stick Back of the Rino Main Display Pages To use the page Option Menu Operating the RinoTo use the Thumb Stick To lock/unlock the buttons Status Bar Overview Radio Initializing the Rino To initialize the unit Using My ID and Symbol FieldsTo enter a name To change the user symbol Changing User symbol Setting the Channel and Squelch Code To change the Channel and/or Squelch Code Scanning and Monitoring To scan or monitor a channels To setup a Scanlist Setup Radio Radio Page Option Menu Unit Operation Radio Setup Tones Use Weather Radio Informational Picture Turn Radio/GPS On/Off Mark Waypoint’s Indicators New Contact Page Overview Enable Send Location see the Setup Radio sectionPeer-to-Peer Positioning To transmit your location to other Rino users To accept a new contact To change contact details Highlight OK and press In when doneTo review a contact and contact details To view a contact on the Map Sending a Location To send a location Map To change scales on the Map To view a Contact from the MapPress the Thumb Stick In to view the details of the Contact Map Page Options Map Page Option Menu Using the Pan Map Option To ﬁnd an item near the map pointer Programming the Data Fields To program a data ﬁeld Setting up the Map To use Map Setup options General Setup To use the Measure Distance option Measuring DistanceTo stop measuring, press the Page button Using the Navigation Navigation To stop navigating Navigation Page Options To change data ﬁelds Calibrating the Compass Using Sight ‘N GoTo use Sight ‘N Go to navigate To calibrate the Electronic Compass Use the Page button to access the NavigationTo turn the compass on and off Altimeter Altimeter Page Options Viewing Pressure/Elevation Plots Adjusting the Zoom RangesTo adjust zoom ranges To view elevation or pressure plots Viewing Points Resetting DataTo reset the elevation data and max elevation ﬁelds To use the View Points option Programming Data Fields Calibrating the AltimeterTo manually calibrate the altimeter Trip Computer Trip Computer Page Options Using the Main Menu Main Menu Alarm Clock-Provides a settable 24-hour alarm clock Main Menu Options To move, insert or remove a Main Shortcuts Menu To mark your current location and open the Mark Waypoint WaypointsMark Waypoint To change Mark Waypoint Page Options To create a waypoint using the panning arrow To create a waypoint for a map featureCreating Waypoints To project a waypoint Projecting a WaypointEditing a Waypoint To edit a waypoint To move a waypoint by dragging it Use the Find ‘N Go feature to display the pointTo delete a waypoint or contact To save Map or Find ‘N Go items as waypoints Find ‘N Go To access the Find ‘N Go MenuHighlight the Find ‘N Go icon and press the Thumb Stick Finding a Waypoint To ﬁnd a waypoint by nearest To ﬁnd a waypoint by name Entering a waypoint name to ﬁnd By Name Finding a Contact To ﬁnd a contact Finding a City To ﬁnd a city Finding an Exit To ﬁnd an exit Finding a Point of Interest Shopping To ﬁnd a point of interest Finding an Address or Intersection Move to the Street ﬁeld using the Thumb StickTo locate an address To locate an intersection Finding an Intersection Finding a Last Found Place To ﬁnd a Last Found Place Weather Radio To turn the Weather Radio on and off To send a new note Sending a NoteTo send a saved note Press the Thumb Stick In until the Shortcuts Menu appears To activate a Goto Using a GotoPress the Thumb Stick In to start navigation Routes Creating and Using a RouteTo create a route To remove all waypoints Editing a RouteTo add a Find ‘N Go Menu item to a route To reverse the route To delete the route To restore default settings for the routeTo copy the route To review a route point To change a route point To remove a point from the route listTo move a route point To add a route point within a route Adding or Editing from the Route MapTo add a point at either end of a route Follow steps 1 and 2 in the previous instructions To review or remove a route point Navigating a RouteTo navigate a route Data Fields for the Route Stopping NavigationTo select data ﬁeld options To open the Tracks TracksTo save and use a Track Using the TracBack Feature To use the TracBack feature Setting up the Track LogTo use Track Log Setup options Proximity To access the ProximityTo turn proximity alarms on or off To add a proximity point Satellite To access the SatelliteSky View Graphic Waas Satellite Strength Satellite Page Options To select Track Up or North Up To enter a new location To access the Setup Menu Setup PagesTime Setup To access the Time Setup Open the Main Menu Main Menu, scroll down and select Setup Units SetupTo access the Units Setup To set the time Loran TD Format Display Setup To adjust the contrast Heading SetupTo access the Display Setup To access the Heading Setup To access the Interface Setup Interface SetupTo select either option Available interface formats are To select a serial data format To change the battery type System SetupTo access the System Setup Select the System icon to open the System Setup To change the month and year To access the CalendarCalendar To use the current month and year To view information for a date To edit or delete a noteTo delete notes by week Choose Delete Notes... from the Option Menu To set an alarm clock time Alarm ClockTo access the Alarm Clock To turn the alarm clock on/off Calculator To access the CalculatorTo change calculator options Stopwatch Lap Options To access the StopwatchStopwatch To use the Stopwatch To set the date and time To access the Sun & MoonSun & Moon To set the location Hunt & Fish To access the Hunt & FishTo set the date To calculate the area To access the Area CalculatorArea Calculator To review the area of a saved track Games To adjust the Grid Size or Square SizeMemory Race Waypoint Bomber Assimilation ClotheslineBeast Hunt What is FRS? FRS Features FRS Limitations Gmrs Physical SpeciﬁcationsPerformance Power Radio Accessories Transferring MapSource Data To setup for data transfer GPS Troubleshooting Guide Symptom Probable Cause Remedy Radio Troubleshooting Guide Symbol Probable Cause Remedy FRS Frequency Chart Weather Radio Frequency Chart Gmrs Frequency Chart Data Field Deﬁnitions 111 Interface Information Garmin Proprietary Sentences FCC Compliance Information FCC Licensing Information Limited Warranty 116 Product Registration Software License AgreementContact Garmin Important Read this Information Before Using Your Rino 119 120 121 122 Altimeter Page