UNIT OPERATION > SETUP PAGES

The available interface formats are:

Garmin—The proprietary format used to exchange waypoint, track, and map data with a PC. Use this setting for transferring data when using a MapSource product.

Garmin DGPS—Allows DGPS input using a Garmin beacon receiver and a standard RTCM SC-104 and DGPS tuning.

NMEA In/NMEA Out—Supports the output of standard NMEA 0183 version 3.0 data. Use this for real-time plotting with MapSource or 3rd party programs.

Text Out—Allows ASCII text output of location and velocity information without input capabilities.

RTCM IN—Allows DGPS input using a standard RTCM SC-104 format without output capabilities.

RTCM In/NMEA Out—Allows DGPS input using a standard RTCM SC-104 format and supports the output of standard NMEA 0183 version 3.0 data.

RTCM In/Text Out—Allows DGPS input using a

standard RTCM SC-104 format and simple ASCII text output of location and velocity information.

None—Provides no interfacing capabilities.

If Garmin DGPS or RTCM In/NMEA Out format is selected, additional fields are provided to control a Garmin differential beacon receiver (e.g. GBR 23) directly from your unit. Tuning is automatic with Scan or you can enter the beacon frequency and bit rate when you select User from the Beacon list to manually tune the receiver. Refer to the beacon receiver instructions.

To select a serial data format:

1.Highlight the Serial Data Format field and then press the Thumb Stick In.

2.Highlight an option and then press the Thumb Stick In to activate it.

Interface Setup Page

86

Rino® 130 Owner’s Manual

Page 92
Image 92
Garmin 130 owner manual Available interface formats are, To select a serial data format