Garmin 130 owner manual Calibrating the Altimeter, Programming Data Fields

Calibrating the Altimeter

Because the Rino 130 relies on the Barometric pressure to determine the elevation and the pressure at any given elevation can fluctuate, you can calibrate the altimeter to increase its accuracy. You must know the elevation or pressure at your current location, information you can obtain from a map or other reliable source.

To manually calibrate the altimeter:

1.Use the Thumb Stick to access the Option Menu.

2.Highlight the Calibrate Altimeter option and press the Thumb Stick to display the Calibration Page.

3.At the message asking “Do You Know The Correct Elevation?” highlight the on-screen Yes button and press the Thumb Stick In to enter your elevation. When finished, highlight OK and press it In to return to the Altimeter Page.

UNIT OPERATION > ALTIMETER PAGE

Or At the message asking “Do You Know The Correct Pressure?” highlight the on-screen Yes button and press the Thumb Stick In to enter your elevation. When finished, highlight OK and press it In to return to the Altimeter Page.

Programming Data Fields

The two user-selectable data fields support this page and can be programmed to display the data options listed to the right.

To program a data field:

1.Use the Thumb Stick to highlight the desired data field and then press it In to open the data field option pop-up window.

2.Use the Thumb Stick to move Up or Down the menu to highlight a desired data option and then press In to place it in the data field.

Rino® 130 Owner’s Manual 41