
UNIT OPERATION > RADIO PAGE
When a Weather Alert tone is detected, the Rino 130 automatically turns on the Weather Radio and broadcasts the Weather Alert if you are not actively transmitting or receiving on the radio. The volume changes to 3/4 the maximum when a Weather Alert is broadcast. Select Disable Weather Alert to turn off this feature.
To turn the weather radio off, press the Thumb Stick In when Use FRS/GMRS Radio is highlighted. This switches the Rino 130 back over to the FRS/GMRS radio operation.
Turn Radio/GPS On/Off
Press the Thumb Stick In on either of these two options to toggle them from on to off. For example, to turn GPS Off, press the Thumb Stick In when Turn GPS Off is highlighted.
Informational Picture
The Informational Picture on the bottom half of the Radio Page features Garmin’s Mr. Mark Waypoint showing current GPS and radio status, and radio actions. As you operate the unit, the graphics change depending on what actions you are taking and the unit settings.
GPS Status
Four satellites are shown on at the top of the picture along with descriptive text to indicate GPS reception status.
As the unit collects satellite information, the satellite symbols flash alternately until all four are steady to indicate a 3D position fix. The more satellites that are steady, the better your position fix.
Radio Transmission Status
As radio signals come in, signal wave symbols display to the left of Mark Waypoint. Fragmented (or broken) signal symbols are shown to indicate activity on that channel.
Audio remains muted because the incoming signal does not match the squelch code your unit is set to.
18 | Rino® 130 Owner’s Manual |