Troubleshooting Tips
Troubleshooting
If you want to... | Possible Remedies |
|
|
No sound in Main Room | • Make sure the muting is not engaged. |
| • If playing a CD, make sure that a disc is loaded. |
| • Try pressing the Source Select button for the desired source again, |
| to reset the correct inputs and power up the correct components. |
|
|
No sound in additional rooms | • Make sure the muting is not engaged. |
|
|
No picture and no sound | • Try another TV station. It may be a station issue. |
| • If playing a DVD, make sure that a disc is loaded. |
| • Try pressing the Source Select button for the desired source again, |
| to reset the correct inputs and power up the correct components. |
|
|
Infrared (IR) remote does not | • Replace the IR remote control batteries. |
operate | • Confirm a direct line of sight from the remote control to the |
| Keypad "eye." |
|
|
Radio Frequency (RF) touchscreen | • Check battery status. Recharge the RF remote in the supplied cradle. |
remote does not operate | • Check transmission status. Move the remote closer to the antenna if |
| necessary. |
|
|
Playback stops suddenly | • Confirm that no one else is operating the system from another room. |
|
|
Channel changes suddenly | • Confirm that no one else is operating the system from another room. |
|
|
Source changes suddenly | • Confirm that no one else is operating the system from another room. |
|
|
TV channel instead of a VHS tape | • Confirm that a VHS cassette is loaded into the VCR. |
|
|
Aspect ratio of the TV picture is | • Cycle through the options on the TV Wide button of the infrared |
wrong | remote control. |
|
|
25