Sony NHS-2000 manual Recharging the RF Remote, Understanding system status, Commander Unit

Using the RF Remote Commander Unit

Cable/Sat Page 2

1.WIDE MODE button. Cycles the main room television among three different widescreen modes: Full, Zoom, Wide Zoom and then back to Full.

2.PAGE BACK button. Takes you to control page 1 of 2.

3.PAGE FORWARD button. Takes you to control page 1 of 2.

4.CABLE/SAT POWER button. Turns on and off your set-top box.

5.NUMERAL buttons. Select channels directly by number.

A.For one- or two-digit channels, touch the numeral buttons and touch the ENTER button.

B.For three-digit disc numbers, touch the >10 button first, then the three numeral buttons and the ENTER button.

6.>10 button. Push this before you select a three-digit channel number.

7.ENTER button. Accesses the channel you've selected with the NUMERAL buttons.

8.F1 button. Activates a custom function, if available, that may be programmed by your installer.

9.F2 button. Activates a custom function, if available, that may be programmed by your installer.

Recharging the RF Remote	Understanding system status.
Commander Unit.	The top right of the LCD window contains status information

The RF Remote Commander unit is powered by an internal, rechargeable battery. When the "low battery" on-screen icon appears in the LCD window, recharge the battery by inserting into the cradle, as shown. The cradle should be plugged into a standard AC power outlet. You can continue to operate the RF Remote Commander unit, even as it recharges in the cradle.

This shows your current volume control setting as decibels below full volume. (For example -20 dB is louder than -30 dB.)

RF communication between the unit and the base station antenna is functioning properly.

RF communication between the unit and the base station antenna is not functioning properly. There may be interference or the transmission distance may be too great.

•Place the RF Remote Commander unit closer to the RF antenna, located near the System Rack.

•Avoid interference by metal objects, such as a cabinets or interference by other Radio Frequency sources.

•Move the RF Remote Commander unit one inch to the left, right, up or down. Sometimes a small movement can solve the problem.

Trouble has occurred. Contact your Sony installer.

The internal battery is being charged by the charger cradle.

Low battery.

•Charge the battery by placing the RF Remote Commander unit on the charger cradle.

13