UNIT OPERATION > ROUTES PAGE
To add a Find ‘N Go Menu item to a route:
1.Select an item from the Find ‘N Go Menu and display its Information Page. If a contact is used in a route, the route changes as the contact’s position is updated, or it may be saved as a Waypoint to serve as a stationary point.
2.Select the page Option Menu and select Add To Route to display the Routes List.
3.Highlight and select the route desired and then press the Thumb Stick In. A “Waypoint Added Successfully” message displays.
Editing a Route
To remove all waypoints:
1.From the Route Page, select the
2.Highlight the Remove All option and then press the Thumb Stick In to remove all waypoints from the list. When you see the prompt “Do you really want to remove all waypoints from the route?”, select Yes.
Route Options
To reverse the route:
1.From the Route Page, select the
2.Highlight the Reverse Route option and then press the Thumb Stick In to reverse the order of waypoints in the list. To change the route back to the original order, repeat this process.
66 | Rino® 130 Owner’s Manual |