Connecting the Power
The scale is powered through the included power adapter. Optionally, the scale can be powered through a USB port on your computer or by three AAA batteries.
To connect the power adapter
1. Plug the power adapter into the power connector on the back of the scale.
2. Plug the other end of the power adapter into a power outlet.
To connect the USB cable
1.Plug the USB cable into the USB port on the back of the scale.
2.Plug the other end of the USB cable into an available USB port on your computer.
The scale is automatically recognized by your computer when the power is turned on.
!If connecting the scale through a USB hub, always use a powered hub or another source of power, such as the included power adapter or batteries.
To insert the batteries
1.Disconnect the power adapter or USB cable from the scale.
2.Remove the battery compartment cover from the back of the scale.
3.Insert three AAA batteries as shown.
!Make sure to insert the batteries correctly. Inserting the batteries backwards can damage the scale.
4.Replace the battery compartment cover.
!Remove the batteries if the scale will not be used for a long period of time.
AAA AAA AAA
2