Dymo S100, S400, S250 manual Troubleshooting, Warranty

Page 8

Troubleshooting

Problem/Error Message

No display

LO is displayed

Negative number is displayed

00000 is displayed

Display reads 0.0 with an item on the platform

Solution

Ensure the scale is plugged in, or replace the batteries.

Replace the batteries.

A tare value is displayed as a negative number when the items

are removed from the scale. Press

0.0

to reset the scale to zero.

TARE

 

 

 

The item on the scale platform exceeds the maximum capacity of the scale. Remove the item immediately to prevent damage to the scale.

This can happen because:

The Tare/Zero button,

0.0

, was pressed while an item was on

TARE

 

 

 

the scale.

Power to the scale was disconnected or turned off and then on again with an item on the scale.

In both of these cases, remove the item from the platform and

press

0.0

to return the display to 0.0.

TARE

 

 

 

If you need further assistance, contact Technical Support at (877) 724-8324. You can also obtain support at www.dymo.com.

Warranty

ONE-YEAR LIMITED WARRANTY

Sanford, L.P., d/b/a Dymo ("Dymo") warrants the Dymo scales to be free from defects in design, materials and workmanship for one year from the date of purchase. If this product is found to be defective within that time, we will promptly repair or replace it at our cost. This warranty does not cover accidental damage, wear and tear or consequential or incidental loss.

WHAT IS COVERED?

This warranty covers this product only and only against defects in design, materials or workmanship. If, after inspection of your returned product, we find that the product is defective in design, materials or workmanship, we shall at no charge to you repair or replace the product at our discretion, and return the product to you. You are responsible for the full cost of shipping the product to Dymo, but there is no charge for the inspection or the return postage.

WHAT IS NOT COVERED?

This warranty does not cover loss of or damage to a computer or other devices connected directly or indirectly to this Dymo product. This warranty also does not cover any loss of or damage to data, programs, records or other information. This warranty does not cover any defect or loss which would not have occurred if instructions in the owner's manual had been followed. This warranty does not cover other incidental or consequential damages even if Dymo has been informed of the possibility of such damages. This warranty is in lieu of all other warranties, express or implied. This warranty gives you specific rights and you may also have other rights, which may vary from state to state or country to country.

HOW TO MAKE A WARRANTY CLAIM

To make a warranty claim, please contact customer support

Customer Support - (877) 724-8324

www.dymo.com

6

Image 8
Contents S100 S250 S400 Page Setting Up the Scale To set up the scaleConnecting the Power To connect the power adapterTo connect the USB cable To insert the batteriesUsing the Tare Feature Using the ScaleTurning On the Power Changing the Units of Measure Using the Hold FeatureMounting the Display Technical Specifications Caring for the ScaleTroubleshooting WarrantyEnvironmental Information Electrostatic Discharge PrecautionsDeclaration of Conformity Documentation Feedback Documentation@dymo.comMounting Template Distributed by DYMO, Atlanta, GA W0056691 Sanford, L.P