Dymo S250, S400, S100 manual Caring for the Scale, Technical Specifications

Page 7

Caring for the Scale

With proper care and handling, your scale will give you years of service. Keep the following in mind when using your scale:

Your scale works best when operated and stored at normal room temperature. Avoid lengthy exposure to extreme heat or cold.

Only operate the scale on a stable, vibration free surface.

Exposure to dust, dirt, moisture, vibration, and air currents; and proximity to other electronic equipment can affect the reliability and accuracy of your scale.

Using the scale in proximity to wireless devices, such as mobile phones, can cause the scale display to fluctuate when the device is in use.

Although this scale is designed to be quite durable, gently place items to be weighed on the platform. Avoid rough treatment, as this may permanently damage the internal sensor and void your warranty.

You can permanently damage the scale by placing significantly overweight items on the scale platform.

Avoid shaking, dropping, or otherwise shocking the scale. This is a precision instrument and

MUST BE HANDLED WITH EXTREME CARE.

The scale has been calibrated at the factory and will not need to be calibrated again.

Technical Specifications

NOT LEGAL FOR TRADE

Model

S100

S250

S400

 

 

 

 

Capacity

100 pounds (45 kg)

250 pounds (113 kg)

400 pounds (181 kg)

 

 

 

 

Weight Increments

0.2 lb (0.1 kg)

0.2 lb (0.1 kg)

0.5 lb (0.2 kg)

 

 

 

 

Accuracy

±0.4 lb

±0.4 lb

±1 lb

Under 110 lb

Over 110 lb

 

±0.8 lb

±2 lb

 

 

 

 

Units

lb/oz (kg/g)

lb/oz (kg/g)

lb/oz (kg/g)

 

 

 

Auto Shut Off

After three minutes of inactivity

 

 

 

 

 

Operating Temperature

50° - 104° F (10° - 40° C)

 

 

 

 

 

Interface

USB 2.0 Low Speed HID Scale Device

 

 

 

 

Power

110 V AC adapter, USB, or 3 AAA alkaline batteries

 

 

 

 

 

For information about our other scale products, visit www.dymo.com.

5

Image 7
Contents S100 S250 S400 Page To set up the scale Setting Up the ScaleTo insert the batteries Connecting the PowerTo connect the power adapter To connect the USB cableTurning On the Power Using the ScaleUsing the Tare Feature Mounting the Display Using the Hold FeatureChanging the Units of Measure Caring for the Scale Technical SpecificationsWarranty TroubleshootingDeclaration of Conformity Electrostatic Discharge PrecautionsEnvironmental Information Documentation@dymo.com Documentation FeedbackMounting Template Distributed by DYMO, Atlanta, GA W0056691 Sanford, L.P