Chapter 11: Appendix

Specifications

NOTE:

This model complies with the specifications listed below.

Designs and specifications are subject to change without notice.

This model may not be compatible with features and/or specifications that may be added in the future.

Television System

NTSC standard

ATSC standard (8VSB)

Digital Cable (64 QAM, 256 QAM; in-the-clear, unencrypted*)

*Encrypted channels can be viewed on this TV using a CableCARD. ª See page 12 for details.

Channel Coverage VHF: 2 through 13 UHF: 14 through 69

Cable TV: Mid band (A-8 through A-1, A through I) Super band (J through W)

Hyper band (AA through ZZ, AAA, BBB) Ultra band (65 through 94, 100 through 135)

Power Source

120 V AC, 60 Hz

Power Consumption

265 W (average)

38 W in standby mode (Using a CableCARD)

34 W in standby mode (Without a CableCARD)

Audio Power

15 W + 15 W

Speaker Type

56HM195: Two 4-3/4-inch (12cm) round

62HM195: Four 4-3/4-inch (12cm) round

72HM195: Four 4-3/4-inch (12cm) round

Video/Audio Terminals

S-VIDEO INPUT:

Y: 1 V(p-p), 75 ohm, negative sync.

C : 0.286 V(p-p) (burst signal), 75 ohm

VIDEO/AUDIO INPUT:

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 22 k ohm or greater)

ColorStream¨ (component video) HD INPUT:

Y: 1V(p-p), 75 ohm

PR: 0.7 V(p-p), 75 ohm

PB : 0.7 V(p-p), 75 ohm

AUDIO: 150 mV(rms), 22 k ohm or greater

Suggested formats: 1080i, 480p, 480i, 720p

_________

** E-EDID = Enhanced-Extended Display Identification

Video/Audio Terminals (continued)

HDMIª INPUT:

HDMI compliant (type A connector) HDCP compliant

E-EDID** compliant

Suggested formats: 1080i, 480p, 480i, 720p

HDMI Audio: 2-channel PCM; 32/44.1/48 kHz sampling frequency; 16/20/24 bits per sample

VIDEO/AUDIO OUTPUT (also for recording):

VIDEO: 1 V(p-p), 75 ohm, negative sync.

AUDIO: 150 mV(rms) (30% modulation equivalent, 2.2 k ohm or less)

VARIABLE AUDIO OUTPUT:

0–300 mV(rms) (30% modulation equivalent,

2.2 k ohm or less)

G-LINK:

3 V(p-p), 3.5 mm mono socket (IR blaster cables supplied)

IEEE1394 INPUT/OUTPUT:

IEEE1394 compliant 4-pin

DIGITAL AUDIO OUTPUT:

Optical type

TheaterNetª OUTPUT:

3 V(p-p), 10 k ohm

Dimensions

56HM195: Width: 51-11/16 inches (1,313 mm) Height: 36-3/16 inches (919 mm) Depth: 16-15/16 inches (430 mm)

62HM195: Width: 57-1/16 inches (1,450 mm) Height: 39-1/4 inches (997 mm) Depth: 18-3/4 inches (476 mm)

72HM195: Width: 65-13/16 inches (1,672 mm) Height: 44-1/16 inches (1,119 mm) Depth: 21-11/16 inches (551 mm)

Weight

56HM195: 90 lbs (40.8 kg)

62HM195: 103 lbs (46.7 kg)

72HM195: 122 lbs (55.3 kg)

Supplied Accessories

Two dual-wand IR blaster cables

Remote control with two size “AA” alkaline batteries

Owner’s Manual (this book)

Optional Stands: 56HM195: ST5685 62HM195: ST6285 72HM195: ST7285

106

Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

 

Page 106
Image 106
Toshiba 56HM195 owner manual Specifications, Edid = Enhanced-Extended Display Identification