Using the POP features, To close the POP window

Chapter 8: Using the TV’s features

Using the POP features

Using the POP double-window feature

The POP (picture-out-picture) double-window feature splits the screen into two windows so you can watch two programs at the same time.

To display a program in the POP window:

1.Select the program you want to watch in the main window.

2.Press SPLIT to open the POP double-window.

POP double-window

Note:

¥When the main window is in the ANT1 or ANT2 mode, the ANT1 and ANT2 inputs cannot be selected for the POP window.

¥When the main window is in Video 1/2/3, ColorStream HD1/HD2, HDMI 1, or HDMI 2 mode, those inputs cannot be selected for the POP window.

Main window	POP window
ANT1	POP
TV12	Video1
	Green border
	(denotes active window)

¥You cannot view IEEE1394 source programs in the POP window.

¥You cannot view two video or two antenna sources in both the main and POP windows simultaneously. (You can view a video source in one window and an antenna source in the other.)

¥The FREEZE feature is not available when the POP double-window is open. If you press FREEZE when the double-window is open, the message ÒNot availableÓ will appear.

3.Press • to highlight the POP (right) window. When highlighted, the window will have a green border.

4.Press INPUT to open the POP Input Selection window. Select the input source for the POP window by pressing the corresponding Number button (0–8). The current source displays in purple in the POP Input Selection window.

POP Input Selection

0 ANT 1

1Video 1

2Video 2

3Video 3

4ColorSteram HD1

5ColorSteram HD2

6HDMI 1

7HDMI 2

8ANT 2

0 - 8 / INPUT to Select

To close the POP window and tune to the highlighted window:

Press ENTER after highlighting the window you want to view as a normal picture.

To close the POP window:

Press SPLIT or EXIT.

Notes about recording:

¥If the POP window is open and you attempt to start recording, the POP window will close and recording will start.

¥If you use the TVÕs remote control to start recording, you will not be able to open the POP window and the message ÒNot AvailableÓ will appear on-screen.

¥It is recommended that you use the TVÕs remote control to start recording. If you use a device other than the TVÕs remote control to start recording, you may be able to open the POP window during the recording process. If this happens, the recorded audio will reflect the audio of the active window (main or POP), which may not be the audio you intended to record.

Numbers

INPUT