How to replace the lamp unit | Toshiba 56HM195 guide

Chapter 11: Appendix

Lamp unit replacement and care (continued)

How to replace the lamp unit

WARNING: RISK OF

ELECTRIC SHOCK!

TO REDUCE THE RISK OF ELECTRIC SHOCK, NEVER REMOVE TV COVERS, EXCEPT AS SPECIFIED HEREIN. REFER ALL SERVICING NOT SPECIFIED IN THIS MANUAL TO QUALIFIED SERVICE PERSONNEL. Failure to follow this WARNING may result in death

or serious injury.

Required tools: Lint-free gloves; manual screwdrivers (Phillips and slotted).

Optional tool: 5/16” nut driver

1. Turn off the TV and unplug the power cord.

WARNING: Eye damage may result from directly viewing the light produced by this

lamp. Always turn off the TV and unplug the power cord before opening the lamp unit door.

2. STOP! Allow the lamp to cool for at least one (1) hour before replacing it.

CAUTION: HOT SURFACE!

The temperature of the lamp immediately after use

exceeds 392¡F (200¡C).

Touching the lamp before it has cooled will result in severe burns. ALLOW THE LAMP TO COOL FOR AT LEAST ONE (1) HOUR BEFORE REPLACING IT.

3. On the lamp unit door on the side of the TV, loosen the screw using a manual screwdriver, and then remove the lamp unit door.

TV back

4. Using a manual screwdriver, loosen the two screws on the lamp unit.

Lamp unit screws

WARNING: RISK OF

ELECTRIC SHOCK!

The lamp unit door is provided with an interlock to reduce the risk of electric shock and excessive ultraviolet radiation. Never defeat its purpose or attempt to service without removing the lamp unit door completely. Failure to follow this WARNING may result in death or serious injury.

5. Grasp the lamp unit handle and gently pull the lamp unit

straight out of the TV. Set the old lamp unit aside (see “Disposing of the used lamp unit” on page 105).

Note: Wear soft, lint-free gloves when replacing the lamp unit.

Lamp unit door detail

loosen screw using manual screwdriver

104	Copyright © 2005 TOSHIBA CORPORATION. All rights reserved.

Image 104

Toshiba 56HM195 owner manual How to replace the lamp unit, Grasp the lamp unit handle and gently pull the lamp unit

Contents

56HM195 62HM195 72HM195 Stand Model Safety PrecautionsConsumers and their families about television safety For replacement of the obsolete outlet Important Safety InstructionsInstallation, Care, and Service Frequent or continuous, unplug the power cord Contact a Toshiba Authorized Service CenterLamp in this product has a limited service life. Never attempt to service the TV yourself Contents Viewing the CableCARD menu 110 Welcome to Toshiba Features of your new TVIntroduction Install the batteries in the remote control See LED indications on Connecting your TV Power Press to turn the TV on and offTV front and side panel controls and connections See LED indications on page 99 for additional information TV back panel connections 7 !¡ Overview of cable types To a Personal Computer PC To view encrypted digital channels For more information, call your local cable operatorYou will need Connecting a VCR and antenna or Cable TV no Cable box Connecting a camcorder Connecting a VCR and Cable box On Screen recording featuresTwo sets of standard A/V cables To view basic and premium Cable channels Connecting a VCR and satellite receiver Select the ColorStream HD-1 video input source on the TV To view premium Cable channels To view the DVD player Your TV has ColorStream component video inputs To view antenna or Cable channelsSelect the ANT 1 video input source on the TV To record a TV program while watching a DVD Connecting two VCRs To view the antenna or Cable signalSelect the ANT-1 video input source on the TV To view VCR Connecting an HDMIª or a DVI device to the Hdmi input One Hdmi cable type a connector per Hdmi deviceTo connect an Hdmi device, you will need To connect a DVI device, you will need Connecting a digital audio system Connecting an analog audio systemTV’s Digital Audio OUT terminal outputs a Dolby To control the audio TheaterNetª on-screen device control To connect the IR blaster cableTo control the devices IR blaster cable wand approx inch from device Connecting IEEE1394 video devices Using analog-compatible IEEE1394 devicesSupported signals Using TheaterNetª on-screen device control When you connect a D-VHS or Avhd device to the TV IEEE1394 device initialization Highlight the device you want to edit and press Enter IEEE1394 device managementTo edit the IEEE1394 device information LINKª connection To connect to the G-LINK ª terminalSee Chapter LINKª IR blaster cable wand approx inch from device Using the remote control Learning about the remote control Remote control effective range Device mode control after programming Installing the remote control batteriesTo install the remote control batteries Remote Control functional key chart Power Audio VCR Mute Device code setup Searching and sampling the code of a device Using the volume lock feature Operational feature resetRepeatedly press Mode to select CABLE/SAT mode To reset the volume controls to the original device mode Multi-brand remote control device codes VCRs/PVRsCable boxes Brand Code CD players ReceiversLaser disks DVD players Menu layout and navigation Main menu layout Setup / Installation menu layout Signal Meter Signal Meter WindowNavigating the menu system ANT1 TV Guide On Screen setup Setting up the TV Guide On Screenª systemConfiguring the location of your TV To set up the TV Guide On Screenª system For additional details, see Setting up the TV Guide On Screenª system After testing and you TV Guide On Screenª Reminder Setting up your TV Configuring the antenna input sourcesTo configure the ANT 1 and ANT 2 input sources Selecting the menu language To program channels automatically Programming channels into the TVÕs channel memoryProgramming channels automatically Manually adding and deleting channels in the channel memory Programming your favorite channels Setting up and using TheaterNetª on-screen device control Setting up TheaterNetTo set up TheaterNet device control To remove a device from TheaterNet Using the TheaterNet control icons To select the deviceÕs control icons directlyTo close the on-screen control icons To view another source TheaterNetª IR device codes AmplifiersLaser disk players Miscellaneous audio devices Video accessory Hdtv decoder Receivers VCRs TMK Brand Setting the time and date Setting the HDMIª audio modeTo set the Hdmi audio mode To set the Avhd device skip time Setting the Quick Restartª Feature To set the Quick Restartª featureViewing the CableCARDª menu To view the CableCARDª menu Viewing the system status Viewing the digital signal meterRestore Factory Defaults To open the TV Guide On Screenª system BelowRating, stereo, HDTV, new episode Lineup so your favorite stations are listed first TV Guide On Screenª remote control functions Navigating the TV Guide On Screenª system To lock/unlock the Video Window Video WindowPanel Menus Info Action Bar Small Info Box Large Info Box Info BoxTV Guide On Screenª Icons Episode Options panel menu TV Guide On Screenª ServicesListings screen Search screen Example Category search To edit or delete a keyword Example Keyword searchList of all matching shows for that keyword is displayed Recordings screen To choose the way recordings are displayedTo view a recording, you can do one of the following Screen a Screen B Schedule screen Record featuresSet a show to Record from a panel menu Manually set a show to Record Recording notification bannerRecord conflict Record icons Manually set a show Reminder Remind featuresSet a show Reminder from a panel menu Remind icons Reminder notification bannerRemind conflict Change channel display Setup screenChange system settings Change default options General defaultsRecord defaults Remind defaults To select the video input source to view Using the TV’s featuresSelecting the video input source to view Labeling the video input sources DTV Satellite/DSS Cable Game ConsoleTo label the video input sources To clear the input labels Tuning channels Using the Channel BrowserªTo toggle between Browse mode and Select mode To tune to a channel in Browse mode Setting a channel as the ÒHomeÓ channel for an input To set a channel as Home using the remote controlTo set a channel as Home using the menus Adding and clearing channels in the channel history Tuning your favorite channels Tuning to the next programmed channelSwitching between two channels using Channel Return Switching between two channels using SurfLockª Selecting the picture size Natural picture sizeYou can view many program formats in a variety of picture To select the picture size Scrolling the TheaterWide picture on None of the picture is hiddenTheaterWide 1 picture size For 43 format program TheaterWide 2 picture size for letter box programs Using the auto aspect ratio feature To set the scroll settingsTo turn on the auto aspect ratio feature To turn off the auto aspect ratio feature Selecting the lamp mode To set the Cinema Mode to FilmTo set the Cinema Mode to Video To select the lamp mode Using the POP features Using the POP double-window featureTo display a program in the POP window To close the POP window and tune to the highlighted window Switching the speaker audio main or POP POP double-window aspect ratio Using the Freeze feature Using the favorite channel scan featureTo scan and tune your favorite channels Highlight the window for the channel you want to view Adjusting the picture quality Adjusting the pictureSelecting the picture mode Using CableClear¨ /DNR digital noise reduction Selecting the color temperatureCableClear/DNR field, select your desired setting To select the color temperature Using Mpeg noise reduction Using dynamic contrastTo select the Mpeg noise reduction level To select dynamic contrast preferences Using the closed caption mode Advanced closed captionsTo view captions or text To view text Highlight T1, T2, T3, or T4 Digital closed captions To select digital closed captions Adjusting the audio Using the digital audio selectorMuting the sound Selecting stereo/SAP broadcasts Using the StableSound¨ feature Adjusting the audio qualityUsing the sub-bass system SBS Selecting the optical audio output format Using the SRS WOWª surround sound featureTurning off the built-in speakers Using the media player Media SpecificationsMemory card specifications Jpeg file specifications Using the Jpeg picture viewer Media player specifications Using the Jpeg picture viewer During the slide showTo set the slide show interval To close the picture viewer Using the MP3 audio player Memory card care and handlingTo use the mute function To close the MP3 audio player Setting the On/Off Timer Setting the sleep timer Understanding the auto power off feature Understanding the last mode memory featureUsing the Gray Level feature Displaying TV setting information on-screen using Recall Using the Locks menu Entering the PIN codeIf you cannot remember your PIN code Changing your PIN code Blocking TV programs and movies by rating V-Chip To block and unblock TV programs and moviesPress z to highlight Edit Rating Limits and press Enter Edit Rating Limits screen below appears Locking video inputs Blocking channelsUnlocking programs temporarily Using the GameTimerª Using the control panel lock feature Troubleshooting Symptom Solution SAP mode may be on. Set the MTS feature to Stereo modeClosed caption problems Rating Blocking V-Chip problems LED indications TV Guide On Screenª FAQs Setup 101 102 Lamp unit replacement and care When to replace the lamp unitAppendix Replacing the lamp unit How to replace the lamp unit Grasp the lamp unit handle and gently pull the lamp unit U.S., call Tacp consumer solutions at 1-800-631 Disposing of the used lamp unit Specifications Edid = Enhanced-Extended Display Identification Limited United States Warranty Limited One 1 Year Warranty on Parts and LaborLimited One 1 Year Warranty on Lamp Unit How to Obtain Warranty Service Limited Canada Warranty How to Obtain Warranty Services 109 87-90 IndexChannel programming Picture adjustments Remote controlPicture-out-picture POP 106 Toshiba America Consumer PRODUCTS, L.L.C