Preparing the wall or ceiling cutout

Confirm there is at least 1" between the final cutout and nearby studs or joints for positioning mounting hardware. Temporarily fasten the stiff paper template (supplied) to the wall with thumbtacks. Carefully trace around the perimeter with a pencil. Before making the final cutout of the entire hole, first make a small 4-inch"test" cutout in the center of your penciled outline. Reach your hand inside to verify that studs are outside the outline. This is an important step, since stud finders are not infallible.

To cut the actual hole, first score wallboard with a sharp knife; then use a keyhole saw to complete the cut. Remove remaining debris from the edges. Hold the speaker up to the cutout to make sure it inserts easily without forcing.

At this point, it is a good idea to secure the speaker wire to a stud near the cutout so its own weight will not tug on the terminals of the speaker after it is connected. This will also prevent you from losing the wire in the wall. Before attaching the wire, make sure the speaker wire runs through, not around, the metal mounting bracket.

final installation

1.Use the supplied cut-out templates to outline the mounting holes to be cut in the wall. Be sure the

intended hole is square and plumb.

Remove the perforated section out of the center of the template. Save this section, it will serve as

apainting mask if you wish to paint the speaker in the wall. Use the inside edge of the remaining section of the template to mark the hole size

2.Cut the hole.

3.Route the speaker wire from the amplifier to the speaker installation location. Secure the wires to prevent them from falling into the wall before the speaker is mounted.

4.Adhesive-backed foam strip-gaskets are supplied with the packing materials. These will be used to line the back of the mounting collar flange. Remove the speaker from the corrugated shipping sleeve. Peel the backing from the foam strip-gaskets and place them along the back of the mounting collar flange. Cut them to size if necessary. Be sure to butt the strips up against each other to prevent possible air leakage. Once the strips are positioned properly, press them firmly into place. NOTE: this step is not necessary if you are installing the speaker into sheet-rock. Sheet-rock is soft enough to compress and naturally seal the gap.

5.Separate the two wire conductors from each other. Strip away approximately 1/4” of insulation from each of the wire conductors. Twist the strands together into neat bundles.

6.Push the positive (+/red) terminal to open the wire hole. Insert the positive conductor and release the terminal to lock the wire into place. Be sure not to insert the conductor too far causing the terminal to lock down on the insulation instead of the wire strands. Perform this same task for the negative (-/black) terminal as well.

HT800IW, HT400iw, HT300iw specifications

The a/d/s/ HT800IW, HT300IW, and HT400IW are a trio of high-performance speakers designed to deliver an exceptional auditory experience for both casual listeners and audiophiles alike. These speakers showcase a perfect blend of modern technology and classic audio craftsmanship, making them suitable for various applications, including home theater systems, music playback, and professional use.

Starting with the HT800IW, this model is distinguished by its robust design and versatility. The HT800IW boasts an 8-inch woofer that produces deep, resonant bass, paired with a 1-inch silk dome tweeter for crisp high frequencies. This combination results in a balanced sound profile that enhances any listening experience. One notable feature is its low-profile design, allowing for easy integration into any room décor without sacrificing sound quality. The speaker is also equipped with advanced crossover technology that ensures seamless frequency distribution between the woofer and tweeter.

Moving on to the HT300IW, this model is particularly celebrated for its compact size and high efficiency. Featuring a 6.5-inch woofer and a 1-inch tweeter, the HT300IW delivers impressive sound output despite its smaller footprint. Ideal for smaller spaces, it is perfect for those who desire rich sound without overwhelming their interiors. The technology behind HT300IW includes a dynamic EQ that adapts the sound output to the acoustics of the room, ensuring optimal performance irrespective of placement conditions.

Lastly, the HT400IW is a standout in the range, offering superior power handling and sound clarity. With its 6.5-inch woofer and dual 1-inch tweeters, the HT400IW is engineered to handle high volumes without distortion, making it suitable for both loud parties and quiet evenings. Advanced materials used in the construction of the woofer cone contribute to its durability and responsiveness, while the built-in protection circuitry ensures longevity.

Together, the a/d/s/ HT series showcases cutting-edge audio technologies, such as their smart mounting systems that simplify installation. Each model seamlessly integrates into various setups, allowing users to enjoy high-fidelity sound without cumbersome setups. Whether upgrading a home theater or enhancing a music listening space, these speakers are engineered to meet and exceed the expectations of discerning listeners everywhere.