Transcription
.
Disconnect the hand control unit.
.
Connect the foot control unit (not supplied) (6).
.
Set POWER to ON.
.
Insert the cassette (7).
.
Set SPEAKER to
.
Press AUTO STOP to make the AUTO STOP indication disappear (13).
.
Set TAPE SPEED.
.
Press REW.
When the tape reaches the beginning of the dictated material, a beep tone is heard and the unit automatically shuts off (12).
.
Press RESET to set the digital counter to zero.
.
Keep the right side of the pedal depressed.
(When the foot control unit (not supplied) is connected.) (14) or
Set the function selector of the hand control unit to LISTEN. (When the hand control unit is connected.) (14)
or
Press LISTEN.
(When the
.
Adjust VOLUME and TONE.
.
Adjust the starting point for playback with the use of REVERSE TIME. (When the foot control unit is used.) Set SPEED CONTROL to ON and adjust SPEED.
After transcribing, stop the tape.
Release the pedal. (When the foot control unit (not supplied) is used.) (14)
or
Set the function selector to STOP. (When the hand control unit is used.) (14)
or
Press STOP. (When LISTEN on the
.
Erase the tape (15).
Introduction
5