Specifications
Tape
y(normal position type)
Recording system
(L channel for electronic index signals, R channel for sound signals)
Tape speed
2.4 cm/s (15⁄16 in./s), 1.2 cm/s (15⁄32 in./s)
Fast winding time
Approx. 1 min. 50 sec. (2.4 cm/s) with Sony microcassette
Frequency response
200 – 4,000 Hz (at 1.2 cm/s)
200 – 6,000 Hz (at 2.4 cm/s)
Speaker
Approx. 5.7 cm (21⁄4 inches) dia.
Power output
350 mW (at 10% distortion)
Input
TELEPHONE PICKUP (minijack) Sensitivity 0.2 mV
Input impedance 10 kilohms
Output
EARPHONE (minijack)
for 8 –
CONTROL UNIT connector
for hand control unit or foot control unit
Power requirements
9 V DC
DC IN 9 V jack accepts the supplied AC power adaptor for use on 120 V AC, 60 Hz
Power consumption
14 W (with the supplied AC power adaptor)
Dimensions
Approx. 200 x 70.5 x 245 mm (w/h/d) (77⁄8 x 27⁄8 x 93⁄4 inches)
including projecting parts and controls
Mass
Approx. 1.2 kg (2 lb 11 oz)
Accessories supplied
AC power adaptor (1) Hand control unit (1)
Cradle for the hand control unit (1)
Design and specifications are subject to change without notice.
Optional accessories
Hand control unit
Foot control unit
Earphone
Headphones
Cleaning kit
Your dealer may not handle some of the above listed optional accessories. Please ask the dealer for detailed information about the optional accessories.
Maintenance
Pinch roller
Erase head | Capstan |
Record/playback head
Cleaning the heads
To produce optimum sound, clean the tape heads after every 10 hours of use.
First, disconnect the AC power adaptor. Press EJECT to open the cassette compartment lid. Moisten a cotton swab or a soft cloth with alcohol, and wipe the parts shown on the left.
Cleaning the cabinet
Clean the cabinet with a soft cloth slightly moistened with a mild detergent solution. Never use strong solvents, such as thinner or benzine, since they may damage the finish.
18
Additional Information