Sony BM-87DS manual Useful Functions XLTR letter signal, XMonitoring while dictating

Page 14

Dictating

Useful Functions

xLTR (letter) signal

You can record electronic index signals on the tape with the HU-80 while the unit is set in the recording (dictating), telephone recording, stop or playback mode.

LTR (letter=end of document) signal: Record at the end of each dictated material.

When the Auto stop function (page 18) is activated (AUTO STOP:ON), the tape automatically stops at each index signal when it is rewound or fast forwarded. Dictated material can be located without the user’s having to listen to the entire tape.

To record the LTR signal

Press the LTR button on the HU-80.

Each time the button is pressed, the LTR INDEX lamp (BM-87DST) lights up for about 3 seconds.

LTR

Notes

•The LTR signal should be recorded with the intervals of more than 6 seconds.

•Playback sound is muted while the LTR signal is recorded. However, the recorded material will be protected.

•While the LTR signal is being recorded with the SPEED CONTROL selector set to ON, the tape will run at the normal tape speed.

xMonitoring while dictating

The recording can be monitored through the headphones. Connect the supplied stereo headphones to the i jack located on the left side of the unit. You can hear the sound in stereo through the stereo headphones. The sound is monaural through the built-in speaker. Adjust the VOLUME monitor if necessary.

VOLUME

to the i jack

Headphones

14

Page 13 Page 15
Image 14
Page 13 Page 15
Contents BM-87DST HU-80 not suppliedInformation For the customers in the United StatesTable of Contents As a transcriber FeaturesAs a dictator Precautions Operation Flow Chart Dictating qdTranscribing qj Eject button Built-in speaker Power lampLocation and Function of Controls TEL REC telephone recording button wdJack qfw DC in 9V jack Control Unit connector Stereo PLAYBACK/AUTO Stop OFFConnecting the Supplied Foot Control Unit Connecting the Power SourceConnecting the HU-80 Hand Control Unit not supplied PreparationCassette Set the Power switch to ON. The Power lamp lights upInserting a Cassette XNotes on cassettes To prevent accidental erasureLTR button Hand speaker Set the Power switch to onDictating Dict dictating StopXMonitoring while dictating Useful Functions XLTR letter signalTo record the LTR signal 123 XTape speed selectorBefore you start dictating When you start dictatingTips for a More Efficient Dictating During dictatingTranscribing OperationUseful Functions Auto stop function Controlling the speedAuto backspace function Selecting the speaker Tape transport operationPrivate listening Tips on TranscribingErasing Recording can be erased rapidlyAlarm System Alarm system Situation To release alarm systemTelephone Recording During telephone recordingCleaning the cabinet MaintenanceCleaning the Heads Specifications Troubleshooting Guide
Top Page Image Contents