Sony BM-87DS manual Telephone Recording, During telephone recording

Telephone Recording

To record a telephone conversation, connect the telephone recording adaptor (not supplied)* to the TELEPHONE PICKUP jack. For further details, refer to the instruction manual of the telephone recording adaptor.

Rear

to the TELEPHONE PICKUP jack

Telephone Recording Adaptor (not supplied)

4	2
POWER
REC/ERASE

13

1Set the POWER switch to ON.

The POWER lamp lights up.

2Insert a cassette. (See page 11.)

3Set the TAPE SPEED selector to 2.4 (cm/s) or 4.8 (cm/s). (See page 15.)

4Keep the TEL REC button pressed for more than a second.

Telephone recording begins. The REC/ERASE lamp flickers when the telephone recording adaptor picks up the sound.

To stop the tape

Press the s STOP button.

At the beginning of telephone recording The LTR signal is automatically recorded.

While the LTR signal is being recorded (for about 3 seconds), the unit cannot be stopped even though the s STOP button is pressed.

During telephone recording

Only the LTR button (HU-80) and the s STOP button (BM-87DST) are operative.

23