Alarm System
The alarm system is activated in the following situations.
Alarm system | Situation | To release alarm system |
When you press a | • No cassette is inserted. | First, release the button, then |
button, | • The cassette’s safety tabs have | • Insert a cassette. |
Beep | been removed. | • Insert a new cassette or cover |
| the slot. | |
|
| |
|
|
|
When the unit shuts off, | •The end of the tape has been | Rewind the tape. |
Beep | reached. |
|
•The tape is torn. | Insert a new cassette. | |
(about 2 seconds) |
|
|
When the unit shuts off, | The LTR signal is detected while | The beep tone stops after about |
Beep | the tape is wound rapidly (in the | 0.5 second. |
fast forward or rewind mode) |
| |
(about 0.5 second) | when the AUTO STOP selector is |
|
set to ON. |
|
22