xAuto backspace function
This function operates only when the supplied foot control unit is connected. With the use of the REVERSE TIME control, the tape is rewound a little each time it is stopped. Then, the last few recorded words can be reviewed when you resume playback. Adjust the REVERSE TIME control to determine the length of the tape to be rewound. At “9” position, the tape is rewound so that the dictated material can be reviewed for approximately 5 seconds*. At “0” position, the tape stops without being rewound at all.
*Measured at some point near the middle of the tape. The reverse time will vary in accordance with the remaining length of the tape.
stops at this point.
Playback
Tape
approx. 5 seconds.
playback
Next playback will start from this point.
stops at this point.
Playback
Tape
playback
Next playback will start from this point.
Set the REVERSE TIME control to the desired position and keep the right side of the pedal of the supplied foot control unit depressed to play back the tape.
Note
The reverse time will be different by a few seconds according to the remaining length or the total time of the tape.
19