Using the RFID reader
You can use the
To use the RFID reader
1.Hold the unit by the handle with the right edge in front of you.
2.Aim the right edge of the unit at the RFID tag. Ensure that the tag is
RFID tag
1 – 1.5 inches
3.Press and release the RFID button on the top of the unit. The RFID light will come on to indicate that the unit is scanning.
The RFID light goes off and the unit beeps to indicate a successful scan. The ASCII and Hex data appears in the RFID Tag Data window.
Note: RFID tags are typically used with specialized applications. See your system administrator for more information.
28 | Chapter 3 Using the system |