NEC 2400 ipx system manual Data Programming

Page 31

OFFICE DATA PROGRAMMING

11.This feature does not support Broad Band Services H0/H1. Therefore, when assigning the IPTRK circuit card routes by the ARTD command, enter BOB = 0.

12.This feature can use link re-connection function. Service conditions are the same as those for the normal CCIS network.

13.PAD can be provided for RECEIVE control only.

14.On a conference call via IPTRK, Echo Canceller cannot be activated when using certain kinds of telephone sets (generally analog telephones).

15.During IPTRK circuit card-related tandem connection, speech quality can become poor, or dual connection failure may occur. DTMF and FAX relay cannot be used.

2.4Data Programming

To activate this service via the Intranet, perform the data programming as follows:

Note: When office data is assigned/modified, be sure to initialize the IPTRK circuit card (by flipping its MB key OFF → ON → OFF).

STEP 1: Assignment of basic CCIS network data

Referring to the NEAX2400 IPX No. 7 CCIS System Manual, assign all the basic data (such as ASYD, ARTD, ATRK, ADPC, ACSC, ACIC1, ACIC2, MBTK, etc.), necessary for the establishment of a CCIS Tie line.

When assigning this data, consider the following:

•Enter IPTRK = 1 for B-channel route on the ARTI command.

•For the port assignment (B-ch) of the IPTRK circuit card, see Figure 3-3.

CHAPTER 3

NDA-24318

Page 24

Issue 1

Page 30 Page 32
Image 31
Page 30 Page 32
Contents November IssueLiability Disclaimer NEAX2400 IPX NEAX2400 IPX Table of ContentsList of Figures List of Tables This page is for your notes General IntroductionNEAX2400 IPX Service Features to be ProvidedBlock Diagram Ccis Networking via IP To Iptrk Block Diagram Fccs Networking via IP Circuit Card Explanations HOW to Follow this Manual and Related Reference ManualsCircuit Card Explanations PA-8IPTB Circuit Card Mounting Locations Port Assignment for PA-8IPTB Circuit Card Lamp indication meanings are shown below Meaning of each switch on this card is shown below OFF SW20 Dynamic Controlling PAD no Pattern Send Receive PA-8IPTB Attachment of Sub Board PZ-8VCTB onto Iptrk Circuit Card PZ-8VCTB Sub Board Ccis Networking VIA IP C-163 Office Data ProgrammingRequired Hardware Required Hardware Point-to-Multipoint Connection Service Conditions Feature Feature Name Condition Number Data Programming Port Assignment of Bch for Ccis Tie Line Acsc Iptrk Ccis Node Node B Node C Overview of Fccs Networking via IP F-36 Fccs Networking VIA IP F-36Example Required Hardware for Fccs Networking via IP F-36 Node a Node B Alternate Routing OK Symbols Bch Speech Iptrk firmware ASYDL, SYS 1, Index 527, b6 Example Data Assignment Acrd 10 Example Data Assignment Actk Fchn = 1 Fchen = 12 Example Assignment of Destination IP and Next IP Aeth Step Iptrk Fccs Data Assignment at Node a Fccs Routing Example Data Sheets 16 Fccs Networking via IP F-36 Example Data Sheet NEAX2400 IPX FPC DTI FCH Fchn Fchn FPC=3, FCHN=3, CRT=70, DSTIP=0.0.0.0, NEXTIP=0.0.0.0 Note Ccis Networking VIA IP C-163/VOICE Over IP H.323 Operation Tests After InstallationContents Test of OPE lamp on Iptrk circuit card Fccs Failure
Related manuals
Manual 644 pages 40.19 Kb

2400 ipx specifications

The NEC 2400 IPX is a robust and versatile business communication solution designed to meet the increasing demands of modern enterprises. It is a part of NEC's esteemed range of IP-based telephony systems, known for integrating sophisticated technology and user-friendly features.

One of the main characteristics of the NEC 2400 IPX system is its modularity. This flexibility allows organizations to scale their communication needs effectively. The system can be customized with various modules that cater to specific requirements, enabling businesses to add or remove functions as their operations evolve. This adaptability makes the NEC 2400 IPX ideal for small to medium-sized enterprises as well as large organizations.

The NEC 2400 IPX incorporates advanced VoIP technology, which facilitates seamless communication over the internet. This leads to reduced operational costs, as traditional phone lines are no longer a necessity. VoIP also enhances mobility, allowing employees to stay connected irrespective of their physical location. The system supports a wide range of endpoints, including digital, analog, and IP phones, facilitating a diverse range of user preferences.

One of the standout features of the NEC 2400 IPX is its user-friendly interface. The system supports advanced call management functionalities, including call forwarding, conferencing, and voicemail services. This user-centric design ensures that businesses can streamline their communications efficiently while providing an intuitive experience for end users.

In addition to its communication capabilities, the NEC 2400 IPX integrates with various business applications, enhancing productivity and collaboration. The system supports features like presence management and instant messaging, allowing for real-time communication among team members. This integration strengthens teamwork and fosters a more connected workplace.

Moreover, the NEC 2400 IPX is built with security in mind. The system employs various encryption technologies to safeguard communications, ensuring that sensitive information remains protected against unauthorized access. This feature is particularly crucial for organizations in sectors such as finance and healthcare, where data security is paramount.

In summary, the NEC 2400 IPX is a leading telecommunications solution that combines modularity, VoIP technology, user-friendly features, and robust security measures. Its ability to adapt to the changing needs of businesses makes it a preferred choice for organizations looking to enhance their communication infrastructure. As technology continues to evolve, the NEC 2400 IPX stands out as a reliable and future-ready choice for modern enterprises.
Top Page Image Contents