Panasonic TH-32LHD7UX manual Color System / Panasonic Auto, Pulldown / Video NR

SET UP

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input	SET UP	1/2
signal mode.(“SIGNAL [VIDEO]” menu is displayed.)
	SIGNAL
	COMPONENT/RGB-IN SELECT
Press to select the “COLOR SYSTEM” or		RGB
“Panasonic AUTO”.	INPUT LABEL	PC
	POWER SAVE	OFF
Press to select each function.	STANDBY SAVE	OFF
	POWER MANAGEMENT	OFF
If the image becomes unstable:	AUTO POWER OFF	OFF
	OSD LANGUAGE	ENGLISH (US)
With the system set on Auto, under conditions of	Press ACTION ( ) button
low level or noisy input signals the image may in
rare cases become unstable. Should this occur, set	SIGNAL	[ VIDEO ]
the system to match the format of the input signal.	3D Y/C FILTER (NTSC)	ON
	COLOR SYSTEM	AUTO
	3 : 2 PULLDOWN	OFF
	Panasonic AUTO (4 : 3)	NORMAL
	VIDEO NR	OFF

Mode			Function
COLOR SYSTEM	Set the color system to match the input signal. If set to “AUTO”, the color system is
	determined automatically.
	AUTO	PAL	SECAM	M.NTSC	NTSC
Panasonic AUTO	Set to “NORMAL” to view 4:3 images in an unchanged format when Panasonic AUTO is
(4:3)	selected. If you would like to view 4:3 images in Just format, set to “JUST”.

3:2 PULLDOWN / VIDEO NR

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie

pictures, which are recorded at 24 frames per second.1/2 If the picture is not stable, turn the setting to OFF.

Note:
	SIGNAL
When ON, this setting only affects the following signal input:	COMPONENT/RGB-IN SELECT
			RGB
• NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.
	INPUT LABEL		PC
• 525i(480i) 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.
	POWER SAVE		OFF
	STANDBY SAVE		OFF
VIDEO NR: Automatically reduces unwanted picture noise.	POWER MANAGEMENT		OFF
	AUTO POWER OFF		OFF
Note:
	OSD LANGUAGE	ENGLISH (US)
VIDEO NR cannot be adjusted while a PC signal is being applied.	Press ACTION ( ) button

1

2

Press to select 3:2 PULLDOWN	SIGNAL	[ VIDEO ]
or VIDEO NR.
	3D Y/C FILTER (NTSC)	ON
	COLOR SYSTEM	AUTO
Press to set ON/OFF.
	3 : 2 PULLDOWN	OFF
	Panasonic AUTO (4 : 3)	NORMAL
	VIDEO NR	OFF

		SIGNAL	[ COMPONENT ]
		3 : 2 PULLDOWN	OFF
R		VIDEO NR	OFF
	Press to exit from adjust mode.

SIGNAL		[ RGB ]
SYNC		AUTO
3 : 2 PULLDOWN		OFF
VIDEO NR		OFF
H-FREQ.	33.8	kHz
V-FREQ.	60.0	Hz
SIGNAL		[ Digital ]
3 : 2 PULLDOWN		OFF
VIDEO NR		OFF
H-FREQ.	33.8	kHz
V-FREQ.	60.0	Hz

29