Panasonic AW-PB309P manual indicates safety information, FCC Note

Page 2
FCC Note:

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER SERVICEABLE PARTS INSIDE.

REFER TO SERVICING TO QUALIFIED SERVICE PERSONNEL.

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (service) instructions in the literature accompanying the appliance.

WARNING:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

CAUTION:

TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD AND ANNOYING INTERFERENCE, USE THE RECOMMENDED ACCESSORIES ONLY.

FCC Note:

This device complies with Part 15 of the FCC Rules. To assure continued compliance follow the attached installation instructions and do not make any unauthorized modifications.

This equipment has been tested and found to comply with the limits for a class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.

 indicates safety information.Manual backgroundManual backgroundManual background indicates safety information.

2

Image 2
Contents RDY RST LINK/RX AW-PWEB card indicates safety information FCC NoteIntroduction ContentsPrecautions for use 3 Turning the WEB card’s power ON and OFF Before useParts and their functions 1 The image updating interval is not a fixed oneInstallation Ask your dealer to install the card in the camera 1 Connections System upgrading3 Installation and settings at the PC end 2 Recommended system requirementsIP address Net mask Gateway 4 Setting the WEB card’s IP addressIP address Net mask http//new IP address setting/config/config.html 5 Re-setting the PC’s addresshttp//192.168.1.50/config/config.html Reference Resetting methodhttp//192.168.1.50/user/pb309.html Image display methodhttp//new IP address setting/user/pb309.html 1 QUALITYConfig screen http//new IP address setting/config/config.html1Network 2Default Image setting3Password 4Submit QueryConcerning the characters used to set the passwords PasswordsTypes of passwords http//192.168.1.50/config/config.html2 Operation password Types of passwords1 Monitor password 3 Management passwordPasswords Server functions External dimensions drawingPan/tilt head and camera control e.g. Reply from 192.1.50 bytes=32 time10ms TTL=255 Before requesting service¢1 How to use the ping command Request timed outAccessories Specifications and accessoriesSpecifications Page