Panasonic AW-PB309P manual System upgrading, Connections, Recommended system requirements

Page 6
System upgrading

System upgrading

[1] Connections

An example of the basic connections is presented below.

Install the WEB card (AW-PB309) in the convertible camera.

O I

AW-PS505

AC adapter

HUB

10Base-T UTP-5 cable (max. 100 m)

Windows PC

Windows PC

[2]Recommended system requirements

1) Personal computer

Provide a Windows-compatible personal computer (PC) with the following performance specifications:

Pentium III : 500 MHz or higher

Memory size: 64MB or more

Network interface card

2)Operating system

Provide any of the following versions of Windows:

Windows 98

Windows ME

Windows 2000

3)Browser software

Provide one of the following browsers in the versions specified:

Internet Explorer 5.5

Netscape 4.7

<Notes>

An adequate picture tracing performance will not be achieved if the PC’s performance is too low.

It may not be possible to achieve the prescribed performance or operation may become

unstable when a Windows or browser version other than the ones recommended is used.

Do not simultaneously install other application software (such as a word processing or spreadsheet program) in addition to the browser. Doing so may cause operation to become unstable.

Pentium is a registered trademark of Intel Corporation.

Windows, Windows 98, Windows ME, Windows 2000 and Internet Explorer are registered trademarks of Microsoft Corporation.

Netscape is a registered trademark of Netscape Communication.

Other company names or product names provided on this product are the trademarks or registered trademarks of the companies concerned.

[3] Installation and settings at the PC end

1.Install one of the recommended versions of Windows in the PC. Follow the instructions provided with the Windows version concerned.

2.Install one of the recommended browsers by following the instructions provided with the software concerned.

3.First, set the IP address of the WEB card. Set the IP address at the PC end as described on the following page in order to make the connection with the PC in the WEB card’s initial setting status.

6

Image 6
Contents AW-P WEB cardRDY RST LINK/RX indicates safety information FCC NoteContents Precautions for useIntroduction 3 Turning the WEB card’s power ON and OFF Before useParts and their functions 1 The image updating interval is not a fixed oneInstallation Ask your dealer to install the card in the camera 1 Connections System upgrading3 Installation and settings at the PC end 2 Recommended system requirements4 Setting the WEB card’s IP address IP address Net maskIP address Net mask Gateway http//new IP address setting/config/config.html 5 Re-setting the PC’s addresshttp//192.168.1.50/config/config.html Reference Resetting methodhttp//192.168.1.50/user/pb309.html Image display methodhttp//new IP address setting/user/pb309.html 1 QUALITYConfig screen http//new IP address setting/config/config.html1Network 2Default Image setting3Password 4Submit QueryConcerning the characters used to set the passwords PasswordsTypes of passwords http//192.168.1.50/config/config.html2 Operation password Types of passwords1 Monitor password 3 Management passwordPasswords External dimensions drawing Pan/tilt head and camera controlServer functions e.g. Reply from 192.1.50 bytes=32 time10ms TTL=255 Before requesting service¢1 How to use the ping command Request timed outSpecifications and accessories SpecificationsAccessories Page