Panasonic AW-PB309P manual Contents, Introduction, Precautions for use

Page 3
Contents

Contents

 

Introduction

3

Precautions for use

3

Before use

4

Parts and their functions

4

Installation

5

System upgrading

6

Image display method

9

Config screen

10

Passwords

12

Pan/tilt head and camera control

15

Server functions

15

External dimensions drawing

15

Before requesting service

16

Specifications and accessories

17

Introduction

When the AW-PB309 WEB card is installed in the AW-E300, 600 or 800A convertible camera, JPEG compression is implemented for the camera’s images, the images are converted into IP packet data after which they can be delivered over a network.

The image quality and size can each be set to one of three levels.

The images can be viewed by a personal computer using a regular browser which means that no special plug-in software is required.

By combining the convertible camera with the AW-PH350 indoor pan/tilt head, the pan/tilt head and camera can be controlled over the network.

(A dedicated software cable is required. Contact your local dealer for details.)

Precautions for use

¥Turn off the power before connecting or disconnecting the cable!

Before connecting or disconnecting the cable, ensure that the power is turned off.

¥Handle the card carefully!

Do not drop the card or subject it to strong shock or vibration. Doing so may cause malfunctioning.

¥Use the card in locations with a low humidity and minimal dust.

Avoid locations with a high humidity or high dust concentrations where the internal mechanism is more susceptible to damage.

¥Use the card within the operating temperature range!

Avoid using the card at temperatures below 14eF (–10eC) or above 113eF (+45eC) since the picture quality will deteriorate and/or the internal parts will be adversely affected.

3

Image 3
Contents AW-P WEB cardRDY RST LINK/RX FCC Note indicates safety informationContents Precautions for useIntroduction 1 The image updating interval is not a fixed one Before useParts and their functions 3 Turning the WEB card’s power ON and OFFInstallation Ask your dealer to install the card in the camera 2 Recommended system requirements System upgrading3 Installation and settings at the PC end 1 Connections4 Setting the WEB card’s IP address IP address Net maskIP address Net mask Gateway Reference Resetting method 5 Re-setting the PC’s addresshttp//192.168.1.50/config/config.html http//new IP address setting/config/config.html1 QUALITY Image display methodhttp//new IP address setting/user/pb309.html http//192.168.1.50/user/pb309.htmlhttp//new IP address setting/config/config.html Config screen4Submit Query 2Default Image setting3Password 1Networkhttp//192.168.1.50/config/config.html PasswordsTypes of passwords Concerning the characters used to set the passwords3 Management password Types of passwords1 Monitor password 2 Operation passwordPasswords External dimensions drawing Pan/tilt head and camera controlServer functions Request timed out Before requesting service¢1 How to use the ping command e.g. Reply from 192.1.50 bytes=32 time10ms TTL=255Specifications and accessories SpecificationsAccessories Page