Panasonic XX-XXXX specifications Settings and Printing, Trouble

Page 27

Settings and Printing

Trouble

The printer prints aslant.

--------

ABCD -----------------

--------

The print out media is wrinkled.

The back of the printed page appears dirty.

Maintenance and Specifications		27
	Troubleshooting
Possible Cause	Corrective Action
The media is not installed	Install media correctly in the
correctly.	media tray.
	Adjust media guides correctly.
Too much media is loaded in	Decrease the media stack so
the media tray.	that the height of media does
	not exceed the limit mark.

	Incorrect type of media is used.	Check the media usable or not
		(see “About Media” on page 8
		in “Settings and Printing”),
		(see “Media” on page 43).
	The media is not installed	Install media correctly in the
	correctly.	media tray.
		Adjust media guides correctly.

	The media is moist.	Use fresh paper.

	Incorrect type of media is used.	Check the media usable or not
		(see “About Media” on page 8
		in “Settings and Printing”),
		(see “Media” on page 43).
	The transfer roller or fuser unit	Display the Printer Console
	is contaminated after clearing a	window and click icon (	)
	jam.	window and click icon (	)
	jam.	to print a cleaning data (see
		to print a cleaning data (see
		“Using the Printer Console
		Window” on page 41 in
		“Settings and Printing”).

	The toner cartridge has	Replace the toner cartridge.
	reached the end of useful life.

	Incorrect type of media is used.	Use a correct media (see
		“About Media” on page 8in
		“Settings and Printing”),
		(see “Media” on page 43).

Image 27

Contents Replaceable Components Cleaning the Printer Settings and Printing Maintenance and Specifications Supplies Replaceable ComponentsExample 5% coverage Personal Image Editing System Model No FeatureCleaning the Printer ExternalInternal Pick up roller Safety Caution Sheet Not to damage Not to touch with handCorona wire Clearing a Jam Media Tray Empty or Misfeed Place the media with the print side down Jam at a Settings and Printing Maintenance and Specifications Jam at B Remove the jammed media from the output tray Push the drum unit down Jam at C Settings and Printing Maintenance and Specifications Jam at D Jam at E Settings and Printing Maintenance and Specifications Trouble Possible Cause Corrective Action TroubleshootingDrum unit see Cleaning See Cleaning Possible Cause Corrective Action Using the Printer Console Window on page 41Trouble Settings and PrintingTrouble Possible Cause Corrective Action Trouble Possible Corrective Action If you can’t make a printIf the print out is ragged Printer Status Display alerts when printing many ﬁlesCleaning the Photosensitive Drum Paste Gear Side pin Close the front cover Indicators Possible Cause Recovery Error IndicationRepacking Instructions RepackingMaterial required Black drum Settings and Printing Maintenance and Specifications Maintenance and Specifications Wipe off any loose toner in and around the printer Printer SpeciﬁcationsConsumables / Life DimensionsMass Weight Power ConsumptionPaper Speciﬁcations MediaPaper and Envelope Sizes Medium Name DimensionLabels Types of Paper to AvoidTransparencies and Labels OHP transparenciesEnvelope Speciﬁcations Settings and Printing Maintenance and Specifications For best printing results Pin conﬁguration Signal Parallel Interface connector printer sideBi-directional Parallel Interface Settings and Printing Maintenance and Specifications USB Interface connector printer side USB Universal Serial Bus InterfacePin conﬁguration