Panasonic XX-XXXX specifications Repacking Instructions, Material required

Page 36

Settings and Printing Maintenance and Specifications

36

Repacking Instructions

Repacking Instructions

Repacking

It is highly recommended that you keep the original carton and ALL packing materials. Should you need to transport or ship your printer, please follow these instructions.

SAFETY CAUTION

The printer weighs about 10 kg {22 lbs.}.

NOTE

•Should you need to send your printer for service, consult your reseller ﬁrst or Panasonic.

•Please use the original carton and all of the original packing materials.

•Do not ship printer with drum unit installed.

•Improper repacking of the printer may result in a service charge to remove spilled toner.

•Since the printer uses dry toner, extreme care must be taken when handling. The printer should be handled in the upright (vertical) position.

Material required:

•Original cartons and packing materials

•Newspaper or drop cloth

•Shipping tape and scissors

1

2

Turn off the printer; remove the power cord and all interface cables.

Open the front cover.

Image 36

Contents Replaceable Components Cleaning the Printer Settings and Printing Maintenance and Specifications Replaceable Components SuppliesPersonal Image Editing System Model No Feature Example 5% coverageCleaning the Printer ExternalInternal Pick up roller Safety Caution Not to touch with hand Sheet Not to damageCorona wire Clearing a Jam Media Tray Empty or Misfeed Place the media with the print side down Jam at a Settings and Printing Maintenance and Specifications Jam at B Remove the jammed media from the output tray Push the drum unit down Jam at C Settings and Printing Maintenance and Specifications Jam at D Jam at E Settings and Printing Maintenance and Specifications Troubleshooting Trouble Possible Cause Corrective ActionDrum unit see Cleaning See Cleaning Using the Printer Console Window on page 41 Possible Cause Corrective ActionSettings and Printing TroubleTrouble Possible Cause Corrective Action If you can’t make a print Trouble Possible Corrective ActionPrinter Status Display alerts when printing many ﬁles If the print out is raggedCleaning the Photosensitive Drum Paste Gear Side pin Close the front cover Error Indication Indicators Possible Cause RecoveryRepacking Instructions RepackingMaterial required Black drum Settings and Printing Maintenance and Specifications Maintenance and Specifications Wipe off any loose toner in and around the printer Speciﬁcations PrinterDimensions Mass WeightPower Consumption Consumables / LifeMedia Paper SpeciﬁcationsMedium Name Dimension Paper and Envelope SizesTypes of Paper to Avoid Transparencies and LabelsOHP transparencies LabelsEnvelope Speciﬁcations Settings and Printing Maintenance and Specifications For best printing results Pin conﬁguration Signal Parallel Interface connector printer sideBi-directional Parallel Interface Settings and Printing Maintenance and Specifications USB Interface connector printer side USB Universal Serial Bus InterfacePin conﬁguration