Panasonic XX-XXXX specifications Error Indication, Indicators Possible Cause Recovery

Page 35

Settings and Printing Maintenance and Specifications

35

Error Indication

Error Indication

	Indicators					Possible Cause	Recovery

				READY	Front cover is open.		Close the front cover.

					Media tray is empty.		Load media in the media tray
					Media tray is empty.		Load media in the media tray
							and press the CONTINUE
				ERROR	Printer failed to feed a media

							button (less than 5 seconds).
					from media tray.		button (less than 5 seconds).
					from media tray.

				TONER/	Media jam has occurred.		Remove the jammed media, then
				DRUM UNIT	Media jam has occurred.		open the front cover and close it.
				DRUM UNIT


					RAM overflow or overrun has		Press the CONTINUE button
					occurred.		(less than 5 seconds).

				READY	Internal error has occurred.		Turn the power off for a few
				READY			secondes then on again. If the
							secondes then on again. If the
				ERROR			error continues, call for service.
							error continues, call for service.

				TONER/
				TONER/
				DRUM UNIT

	*1			READY	Toner is low.		Replace the toner cartridge soon.

				ERROR	Drum unit is wearing out.		Replace the drum unit soon.
					Drum unit is wearing out.		Replace the drum unit soon.


				TONER/
				TONER/
				DRUM UNIT

				READY	Drum unit is not installed.		Install the drum unit.
				READY
					Toner is empty.		Replace the toner cartridge now.
				ERROR
				ERROR	Drum unit is worn out.		Replace the drum unit now.
				TONER/	Drum unit is worn out.		Replace the drum unit now.

					Drum unit is worn out and toner		Replace the toner cartridge and
				DRUM UNIT	Drum unit is worn out and toner		Replace the toner cartridge and
					is empty.		drum unit now.

,	: Indicator is lit.				,	: Indicator is blinking fast (with an interval of 1 second).

: Indicator is turned off.

*1 The indication varies depending on the printer status.

Image 35

Contents Replaceable Components Cleaning the Printer Settings and Printing Maintenance and Specifications Supplies Replaceable ComponentsExample 5% coverage Personal Image Editing System Model No FeatureInternal Cleaning the PrinterExternal Pick up roller Safety Caution Sheet Not to damage Not to touch with handCorona wire Clearing a Jam Media Tray Empty or Misfeed Place the media with the print side down Jam at a Settings and Printing Maintenance and Specifications Jam at B Remove the jammed media from the output tray Push the drum unit down Jam at C Settings and Printing Maintenance and Specifications Jam at D Jam at E Settings and Printing Maintenance and Specifications Trouble Possible Cause Corrective Action TroubleshootingDrum unit see Cleaning See Cleaning Possible Cause Corrective Action Using the Printer Console Window on page 41Trouble Settings and PrintingTrouble Possible Cause Corrective Action Trouble Possible Corrective Action If you can’t make a printIf the print out is ragged Printer Status Display alerts when printing many ﬁlesCleaning the Photosensitive Drum Paste Gear Side pin Close the front cover Indicators Possible Cause Recovery Error IndicationMaterial required Repacking InstructionsRepacking Black drum Settings and Printing Maintenance and Specifications Maintenance and Specifications Wipe off any loose toner in and around the printer Printer SpeciﬁcationsConsumables / Life DimensionsMass Weight Power ConsumptionPaper Speciﬁcations MediaPaper and Envelope Sizes Medium Name DimensionLabels Types of Paper to AvoidTransparencies and Labels OHP transparenciesEnvelope Speciﬁcations Settings and Printing Maintenance and Specifications For best printing results Bi-directional Parallel Interface Pin conﬁguration SignalParallel Interface connector printer side Settings and Printing Maintenance and Specifications Pin conﬁguration USB Interface connector printer sideUSB Universal Serial Bus Interface