Panasonic XX-XXXX specifications Trouble Possible Cause Corrective Action

Page 28

Settings and Printing Maintenance and Specifications

28

			Troubleshooting
Trouble	Possible Cause		Corrective Action

Frequent media-	The length media guide of the	Check the length media guide
picking errors occur.	media tray is not set correctly.	is set to the groove indicating
		the media size.

		Check the loaded media is not
		curled.

	The media is not set correctly	Check the media is not set on
	in the media tray.	the media height stopper (A) of
		the length media guide.

			A

	Pick up roller is dirty.	Clean the pick up roller (see
		“Cleaning the Printer” on page
		5).

Image is cut.	Image size is bigger than print	Adjust the image within the
	area.	print area. 4.2 mm (0.17″) is
		required for the top, bottom
		and sides margins.

Image 28

Contents Replaceable Components Cleaning the Printer Settings and Printing Maintenance and Specifications Replaceable Components SuppliesPersonal Image Editing System Model No Feature Example 5% coverageExternal Cleaning the PrinterInternal Pick up roller Safety Caution Not to touch with hand Sheet Not to damageCorona wire Clearing a Jam Media Tray Empty or Misfeed Place the media with the print side down Jam at a Settings and Printing Maintenance and Specifications Jam at B Remove the jammed media from the output tray Push the drum unit down Jam at C Settings and Printing Maintenance and Specifications Jam at D Jam at E Settings and Printing Maintenance and Specifications Troubleshooting Trouble Possible Cause Corrective ActionDrum unit see Cleaning See Cleaning Using the Printer Console Window on page 41 Possible Cause Corrective ActionSettings and Printing TroubleTrouble Possible Cause Corrective Action If you can’t make a print Trouble Possible Corrective ActionPrinter Status Display alerts when printing many ﬁles If the print out is raggedCleaning the Photosensitive Drum Paste Gear Side pin Close the front cover Error Indication Indicators Possible Cause RecoveryRepacking Repacking InstructionsMaterial required Black drum Settings and Printing Maintenance and Specifications Maintenance and Specifications Wipe off any loose toner in and around the printer Speciﬁcations PrinterDimensions Mass WeightPower Consumption Consumables / LifeMedia Paper SpeciﬁcationsMedium Name Dimension Paper and Envelope SizesTypes of Paper to Avoid Transparencies and LabelsOHP transparencies LabelsEnvelope Speciﬁcations Settings and Printing Maintenance and Specifications For best printing results Parallel Interface connector printer side Pin conﬁguration SignalBi-directional Parallel Interface Settings and Printing Maintenance and Specifications USB Universal Serial Bus Interface USB Interface connector printer sidePin conﬁguration