Important Information
12)Unplug this apparatus during lightning storms or when unused for long periods of time. This will prevent damage to the product due to lightning and
13)Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as power- supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
SAVE THESE INSTRUCTIONS
Additional safety information
1.Use only the power source marked on the unit. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
2.Use only the specified AC adaptor.
3.Do not tamper with the plug.
4.Make sure the plug is securely inserted.
5.Do not touch the plug with wet hands.
6.Do not place objects on the power cord. Install the unit where no one can step or trip on the cord.
7.To reduce the risk of electric shock, do not disassemble this unit. Take the unit to an authorized service center when service is required. Opening or removing covers may expose you to dangerous voltages or other risks. Incorrect reassembly can cause electric shock when the unit is subsequently used.
8.Unplug this unit from power outlets and refer servicing to an authorized service center when the following conditions occur:
A.If smoke rises, or an unaccustomed noise or smell is discharged from the unit.
B.If metal objects have been dropped inside the monitor station.
9.Do not put your ear(s) near the speaker, as loud sounds emitted from the speaker may cause hearing impairment.
10.Only a qualified technician is allowed to connect a power cable to the unit. Contact an authorized service center.
11.Do not make any wiring connections when the power supply is turned on.
12.Never install wiring during a lightning storm.
13.Do not connect a power cable other than the specified voltage.
14.Do not connect the power cable to any terminal other than the one specified.
15.When existing chime wires are used, it is possible that they contain AC voltage. Electric shock or unit damage could result. Contact an authorized service center.
16.Never touch the inside of the monitor station. High voltage is present.
17.Make certain when mounting the unit to any wall surface that the method used will hold the weight of the unit properly.
18.If the wiring is outdoors, use a protection tube or a surge protector.
19.If the wiring is underground, do not make any connections underground.
20.WARNING – To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture.
4