Other Features
Skyshot Mode
■Manual Skyshot Mode
When using this function, the custom size should be registered into memory (M1, M2) in advance. (See page 32)
Platen
Upper- left corner
1 | 2 | 3 4 |
Place the | Select the Custom | Number of | Press |
Original | Size (M1 or M2) | Copies | START |
#Press the FUNCTION key.
2
FUNCTION MODE
2:COPIER SETTINGS PRESS SET TO SELECT
COPIER PARAM.
07 MANUAL SKYSHOT 1:OFF
$Press the 2 key to select COPIER SETTINGS.
%Press the SET key.
&Press 7 and SET key to select MANUAL SKYSHOT.
(Press 2 or 3 key to select the Custom Size.
1: OFF | NONE |
2: M1 ON | M1 size is ON* |
3: M2 ON | M2 size is ON* |
4: M1, M2 ON | Both sizes are ON |
| )Press the SET key. | |
| *Press the RESET key. | |
|
| |
|
| |
NOTE | ∗ The default size for M1 is: 70(X) ⋅ 160(Y) mm, and M2 is: 95(X) ⋅ 220(Y) mm | |
CWhen changing the M1 or M2 size, consult with the key operator. | ||
| ||
| CWhen using the Manual Skyshot mode, M1 and M2 are turned ON and other | |
| job memory cannot be used. | |
| CPress the RESET key to cancel all job settings. |
26