Panasonic DP-1510P manual Add Toner Warning Indicator, Light Copies, Marked Copies

Page 53

Troubleshooting

2.The Toner Charging Mode starts and the LCD displays:

CHARGING TONER

Add Toner Warning Indicator:

CFlashing = Toner Bottle is nearly empty

CLit	= Toner Bottle is empty

3. This message is displayed for approximately 200 seconds.

CHARGING TONER

❚ ❚ ❚ ❚ ❚

∗ Each “ ❚ ” is approximately 10 sec.

4.This massage will continue to be displayed until the warm-up cycle is completed, and if the toner bottle was replaced. Upon completion, the Add Toner Warning Indicator automatically turns Off.

Check

Action

Light Copies

Does the exposure indicator say “Lighter”?

Press the Darker key until the indicator LED is set to Darker. (See page 12)

	(No)		(Yes)
	(No)
	Does the add toner indicator and message		Add Toner. (See page 43)
	appear on the display? (?)		Add Toner. (See page 43)
	appear on the display? (?)
			(Yes)

	Marked Copies

Is the copier Platen Glass or Platen Cover dirty?

Clean the Glass or Platen Cover. (See page 54)

(Yes)

Others

Image 53

Contents English Others Before StartingOptions Model and Serial Number Important InformationCommon Features and Usage Operation ChartEnergy Star Table of Contents Others Problem SolvingOptions Laser Safety PrecautionsFor Your Safety Toner and Paper Ventilation HandlingFor U.K InstallationControl Panel LCD Display Contents Refer to Stop KeyInterrupt Key, Memory in Key, M1/M2 Keys Copy Size KeyFull Size Copying Basic CopyCopying the Same Size Originals $Select Exposure ControlReduction or Enlargement Copying Copying with Preset RatiosSelect the Copy Paper Tray keyZoom Zoom CopyingPress Cursor G or F keys to select Zoom Ratio Select Original$Adjust the side guides Using the Sheet BypassCopying on Special Paper, etc Press StartProcedure Creative Features1 Copy PressPlaten Place the Press Originals page Copy KeyCopy Or Margin key Press BOOK, EdgeBook \ Sided/1-Sided Copy For DP-2010EKey Operation Sided Copy key \ 2 / 2 \1 / 2 \ 2 Copy For DP-2010EPress 2-Sided Place the Original on the Platen Book \ 2 Copy For DP-2010ETo Store a Job in Memory Job MemoryTo Recall a Job Stored in Memory $Press the Memory in F2 keySort Copy Sort ModeSort Copy From Platen Glass onlyEnergy Saver/Interrupt Mode Other FeaturesEnergy Saver Mode Sleep ModeDigital Skyshot Mode Skyshot ModePlaten Upper- left corner Manual Skyshot ModeRemarks Combined Function TableNext Job Memory RetrievalFunction Using Function Modes to Change the Initial Copy ModesGeneral Functions Modes Function Initial SettingCopier Settings General Functions for Key Operator Copier Settings for Key Operator Changing the Auto Exposure Setting Function SettingPress the Function key Proceed as FollowsFunctions Function Setting for Key OperatorChanging the Paper Size Paper IndicatorStopper Guide a Paper Guide b SizeDepartment Counter Select the Department Counter Mode Page Components AccessoriesAutomatic Document Feeder FeaturesADF DA-AS180 / i-ADF DA-AR201 ComponentsPlace OperationOriginal Inappropriate OriginalsSheet Paper Tray Problem SolvingAdding Paper J Open the Front Cover Adding the Toner and Replacing Waste Toner Container ?Remove the Waste Toner Container by Slowly pulling it towards the left asProblem Solving Paper Misfeed Locations Removing a Misfed PaperRemove the misfed paper Paper Exit AreaOpen the Right Cover Remove the misfed paper Paper Entry/Transport AreaHot HeatedClose the Right Cover ADU Area For DP-2010E onlyOpen the Right Cover Paper Feed Module ADF For DP-2010E only ADF Before Calling Service TroubleshootingCheck Action Unit Does Not OperateMarked Copies Add Toner Warning IndicatorLight Copies As a rule, clean weekly User Error Codes U CodeDP-1510P/1810P/2010E Copier SpecificationsADF DA-AR201 ADF DA-AS1802nd/4th Paper Feed Module DA-DS182 3rd Paper Feed Module DA-DS183For Printer Options and SuppliesFor Network Printing SuppliesPage Page For Service, Call