Panasonic DP-1510P manual Problem Solving

Page 44

Problem Solving

Adding the Toner and Replacing Waste Toner Container (?)

52 1

#Shake the new Toner Bottle four or five times to loosen the contents.

$Remove the cap from the Toner Bottle.

6	1
	1
2	2-1	2-3
	2-2
	Incorrect	Correct

#Align the Key of the bottle, also represented by the Arrow mark (Unlocked symbol ) visible on

the end of the Toner Bottle with the Arrow mark on the machine.

Note: To prevent toner spill, ensure that the key is facing upwards before installing the bottle.

$Insert the bottle as far as it will go, then turn it clockwise (160°, approx. 1/2 turn) until it locks (Locked symbol ).

Note: If the bottle is not inserted all the way into the machine as illustrated, turn the bottle slightly in either direction to engage the key and try it again.

Install a new Waste Toner Container.

Close the Front Cover.

ATTENTION CDo not reuse the toner from the Waste Toner Container.

Image 44

Contents English Others Before StartingOptions Important Information Model and Serial NumberOperation Chart Common Features and UsageEnergy Star Table of Contents Others Problem SolvingOptions Laser Safety PrecautionsFor Your Safety Handling Toner and Paper VentilationInstallation For U.KControl Panel Contents Refer to Stop Key LCD DisplayInterrupt Key, Memory in Key, M1/M2 Keys Copy Size KeyBasic Copy Full Size CopyingCopying the Same Size Originals $Select Exposure ControlCopying with Preset Ratios Reduction or Enlargement CopyingSelect the Copy Paper Tray keyZoom Copying ZoomPress Cursor G or F keys to select Zoom Ratio Select OriginalUsing the Sheet Bypass $Adjust the side guidesCopying on Special Paper, etc Press StartCreative Features Procedure1 Copy PressPlaten Place the Press Originals page Copy KeyCopy Press BOOK, Edge Or Margin keyBook \ Sided/1-Sided Copy For DP-2010EKey Operation Sided Copy key \ 2 / 2 \1 / 2 \ 2 Copy For DP-2010EPress 2-Sided Book \ 2 Copy For DP-2010E Place the Original on the PlatenJob Memory To Store a Job in MemoryTo Recall a Job Stored in Memory $Press the Memory in F2 keySort Mode Sort CopySort Copy From Platen Glass onlyOther Features Energy Saver/Interrupt ModeEnergy Saver Mode Sleep ModeSkyshot Mode Digital Skyshot ModeManual Skyshot Mode Platen Upper- left cornerCombined Function Table RemarksNext Job Memory RetrievalUsing Function Modes to Change the Initial Copy Modes FunctionModes Function Initial Setting General FunctionsCopier Settings General Functions for Key Operator Copier Settings for Key Operator Function Setting Changing the Auto Exposure SettingPress the Function key Proceed as FollowsFunctions Function Setting for Key OperatorChanging the Paper Size Indicator PaperStopper Guide a Paper Guide b SizeDepartment Counter Select the Department Counter Mode Page Accessories ComponentsFeatures Automatic Document FeederADF DA-AS180 / i-ADF DA-AR201 ComponentsOperation PlaceOriginal Inappropriate OriginalsSheet Paper Tray Problem SolvingAdding Paper J Adding the Toner and Replacing Waste Toner Container ? Open the Front CoverRemove the Waste Toner Container by Slowly pulling it towards the left asProblem Solving Removing a Misfed Paper Paper Misfeed LocationsPaper Exit Area Remove the misfed paperPaper Entry/Transport Area Open the Right Cover Remove the misfed paperHot HeatedClose the Right Cover ADU Area For DP-2010E onlyOpen the Right Cover Paper Feed Module ADF For DP-2010E only ADF Troubleshooting Before Calling ServiceCheck Action Unit Does Not OperateMarked Copies Add Toner Warning IndicatorLight Copies User Error Codes U Code As a rule, clean weeklySpecifications DP-1510P/1810P/2010E CopierADF DA-AS180 ADF DA-AR2012nd/4th Paper Feed Module DA-DS182 3rd Paper Feed Module DA-DS183Options and Supplies For PrinterFor Network Printing SuppliesPage Page For Service, Call