Panasonic AW-SW350P manual Image Transfer Function, Functions, Specifications, Ram

Page 11

IMAGE TRANSFER FUNCTION

The AW-SW350 Live Switcher comes with a function for transferring images from the host computer using the USB (Universal Serial Bus). The image data transferred from the host computer can be used as the key input signals or main input signals of the AW-SW350.

When the image transfer function is to be used for the first time, the dedicated device driver and application program must be installed in the host computer. They can be installed from the CD-ROM that is supplied with the AW-SW350. For details on how to install them, refer to “Installing the Device Driver” and “Installing the Application Program”.

■FUNCTIONS

The USB image transfer program used with the AW-SW350 contains the following functions.

•Frame memory image transfer function (RAM)

•Flash memory image transfer function (ROM)

•Image cutout position designation function

•Image start position designation function

For more details on how to use these functions, refer to “Operation Method”.

■SPECIFICATIONS

In order for the host computer to run the USB image transfer program used with the AW-SW350, it must satisfy the following system requirements.

Processor

Pentium III, 1 GHz or up recommended

 

 

RAM

128 MB or more

 

 

Free hard drive memory

50 MB or more

 

 

Operating system

Windows 98 Second Edition (SE), Windows Me,

 

Windows 2000, Windows XP

 

 

USB port

USB Version 1.1 or up

 

 

CD-ROM drive

Essential

 

 

Image files in two formats, the bitmap format (bmp) and JPEG format (jpg, jpeg), can be used with the USB image transfer program for the AW-SW350. Also required separately when using the image transfer function is the A-B type USB cable for connecting the host computer with the AW-SW350.

Caution

More time is required to transfer the images if the performance of the personal computer is low-level. The function will not work with versions of Windows that are not recommended (Windows 3.1, Windows 95, Windows 98, Windows NT4.0).

Pentium is a registered trademark of Intel Corporation.

Windows, Windows 98, Windows Me, Windows 2000 and Windows XP are registered trademarks of Microsoft Corporation.

20

21

Page 10 Page 12
Image 11
Page 10 Page 12
Contents Model No. AW-SW350P FCC Note Contents Preface FeaturesPrecautions WPower Switch Power ON/OFF EWipe Pattern Selection Switches Wipe PatternRSetting Switch Setting QPower Indicator PowerIKey Synthesis Setting Controls KEY TColor Background Color Selector Switch ColorYWipe Direction Selection Switch N/ N/R/ R UTransition Time Setting Controls Transition TimeQB-Bus Input Selection Switches PIntercom Volume Incom LevelGenlock Phase Controls GEN-LOCK Phase Bus Input Selection SwitchesRear Panel DGenlock Input/BB Output Connector GLIN/BBOUT Signal Input Jacks Y/C in 1, 2, 3, 4AVideo Output Connectors PGM OUT 1 SPreview Output Connector PVW OUTLDC Power Input Terminal DC 12V KSetup switchesQFrame Sync Switch FS ON/FF RBus Selector Switch BUS A/B /F.FRAM SpecificationsImage Transfer Function FunctionsConnections Installing the Device DriverDevice manager screen Installing the Application ProgramOperation Method Application program installer start screenSpecifying the image start position RAM+ROM When images could not be transferredTransfer time VCR, etc ConnectionsConnection to Personal Computer Example for the Connection with PAN/TILT Heads Control Panel Rack Mounting Rack MountingStandard Accessories Memo Panasonic Broadcast & Television Systems Company
Top Page Image Contents