Panasonic AW-SW350P manual Preface, Features, Precautions

Page 4

PREFACE

The AW-SW350 has five video inputs, wipe, mix and key synthesis functions despite its compact dimensions. Since it has a built-in frame synchronizer, it accepts the input of asynchronous signals. Moreover, it enables systems to be configured using the black burst signals which it outputs, and it supports external synchronization (or genlock) to external sync signals as well. Its image transfer function enables the images and text created using a personal computer to be captured in the switcher through its USB port. The switcher can be used in the field because it operates on an external power supply (12 V DC) while its tally outputs and intercom inputs/outputs permit easy system configuration.

FEATURES

Five Inputs Despite Compactness

The switcher has five composite video signal inputs. (Automatic termination. Loopthrough output provided) It also has an S-terminal (4-pin), and can thus handle YC signals. Input 5 can be switched to the internal frame memory or vice versa by means of a switch. Internal black or color signal (9 patterns) can be selected.

Three Program Outputs, Preview Outputs Available

Effect outputs including two composite video outputs (BNC connectors) and one YC signal output (S-terminal, 4-pin) are available, so it is easy to build a system with monitors, VCRs, etc. The AW-SW350 also features the Preview output to confirm the next operation. (Look Ahead Preview)

Frame Synchronizer System and Genlock System Supported

The switcher contains a high-performance 10-bit frame synchronizer: this means that asynchronous signals can be directly input to the input camera or other such device without having to initiate genlock. Its inputs are equipped with a frame synchronizer function so that its images are do not freeze even when the frames are switched. Alternatively, the frame synchronizer can be turned off, genlock can be applied to a camera or other such device, and the unit can be used as a wideband switcher with minimal deterioration in image quality (resolution of 800 lines).

Genlock

The switcher enables genlocking to the reference sync signal of an external device. Furthermore, by using its BB output, the system can be upgraded using the synchronization of the switcher as a reference.

Image Transfer, Soft Keys and Linear Keys

Inside the switcher AW-SW350 has a 1-frame frame memory so that the images created using a personal computer can be captured in this memory through the USB port. There are nine different patterns for wipe, and one of three softness levels can be set. Text can also be synthesized smoothly by performing linear key operations.

External Power Supply

The switcher can be used both indoors and outdoors because it operates on an external power supply of 12 V DC.

(However, it is not built rainproof or dripproof. Do not expose the switcher to rains or moisture.)

Tally and Intercom Provided

Five tally outputs and five intercom inputs and outputs are available so that the switcher can be directly apply to conventional systems. (The switcher has its own intercom on the panel.)

PRECAUTIONS

Handle with Care.

Do not drop the switcher, or expose it to strong shock or vibration. This is important to prevent trouble and accidents.

Operating temperature range 32F to 104F

Avoid using it in a cold place below 32F or a hot place above 104F because low or high temperature will adversely affect the parts inside.

Switch power off before cables connection or disconnection.

Be sure to switch power off before connecting or disconnecting the cables.

Use at a Place Not Humid, Not Dusty.

Avoid using the switcher at a humid, dusty place because the internal parts are subject to damage by moisture and dust.

Care

Switch power off and wipe the switcher with a dry cloth. If it is difficult to remove the dirt, dip a cloth into a diluted solution of kitchen detergent, squeeze it hard, and wipe the product carefully.

Note

Do not use benzine, paint thinner, or other volatile liquids.

When using a chemical duster, carefully read the caution notes on its use.

6

7

Image 4
Contents Model No. AW-SW350P FCC Note Contents Precautions FeaturesPreface EWipe Pattern Selection Switches Wipe Pattern RSetting Switch SettingQPower Indicator Power WPower Switch Power ON/OFFTColor Background Color Selector Switch Color YWipe Direction Selection Switch N/ N/R/ RUTransition Time Setting Controls Transition Time IKey Synthesis Setting Controls KEYPIntercom Volume Incom Level Genlock Phase Controls GEN-LOCK PhaseBus Input Selection Switches QB-Bus Input Selection SwitchesRear Panel Signal Input Jacks Y/C in 1, 2, 3, 4 AVideo Output Connectors PGM OUT 1SPreview Output Connector PVW OUT DGenlock Input/BB Output Connector GLIN/BBOUTKSetup switches QFrame Sync Switch FS ON/FFRBus Selector Switch BUS A/B /F.F LDC Power Input Terminal DC 12VSpecifications Image Transfer FunctionFunctions RAMInstalling the Device Driver ConnectionsInstalling the Application Program Device manager screenApplication program installer start screen Operation MethodSpecifying the image start position Transfer time When images could not be transferredRAM+ROM Connections VCR, etcConnection to Personal Computer Example for the Connection with PAN/TILT Heads Control Panel Rack Mounting Rack MountingStandard Accessories Memo Panasonic Broadcast & Television Systems Company