6 In order to confirm that the device driver has been installed successfully, it is recommended that you open the Device manager as shown in Fig.5, and check that
Fig.5 Device manager screen
■INSTALLING THE APPLICATION PROGRAM
This section describes how to install the application program used with the USB image transfer program for the
1 Insert the
2 Run the “Microsoft .Net Framework” setup file (E:\JPN\DOTNETFX.EXE).
3 The installer program shown in Fig.6 now starts. Proceed with the installation by following the installer instructions.
Fig.6 Microsoft .Net Framework installer start screen
4 Run the setup program (E:\JPN\SETUP.EXE).
24 | 25 |