Panasonic KX-HNB600 Registering another mobile device, Registering other devices to the hub

Page 13

Setup

Information about Wi-Fi communication

The hub uses Wi-Fi to communicate with your wireless router. Refer to the following information when planning where to place the hub.

Do not use the hub in the following areas or locations. Malfunction or interference to radio communication may result.

RIndoor areas that have certain types of radio or mobile communications equipment

RLocations near microwave ovens or Bluetooth devices

RIndoor areas where antitheft devices or 2.4 GHz frequency devices such as POS systems are used

Do not place the hub in areas where the following materials or objects are located between the hub and the wireless router.

These materials and objects may interfere with wireless communication or cause wireless transmission speed to become slower.

RMetallic doors or shutters

RWalls containing aluminum-sheet insulation

RWalls made of concrete, stone, brick, or tin

RMultiple walls

RSteel shelving

RFireproof glass

Registering another mobile device

After you have used your mobile device to perform the initial setup procedure, you can add other mobile devices to the system. Before following this procedure, make sure you have completed the Initial Setup procedure.

1Using the mobile device that you want to register, download the [Home Network] app and then start the app.

2Tap [Add Mobile Device].

3When prompted, press MWi-Fi SETUPN on the hub.

R Your mobile device will be registered to the hub.

4When prompted, follow the on-screen instructions and enter the password used to log in to the hub while away from home. R The app’s home screen is displayed.

Registering other devices to the hub

This procedure is not required for devices that were included as part of a bundle.

Before you can use cameras, sensors, and smart plugs, they must be registered to the hub.

If you purchased devices separately (i.e., not as part of a bundle), you must register each device to the hub.

You can register each device by using the registration buttons or the [Home Network] app.

For assistance, please visit www.panasonic.com/support

13

Image 13
Contents Thank you for purchasing a Panasonic product Home Network SystemTable of Contents Supplied accessories Accessory informationAdditional accessories Other informationExpanding the Panasonic Home Network System Smart Plug KX-HNA101 50 max.*3 Mobile devicesYour mobile devices 8 max About this system For your safetyInstallation and location Important safety instructionsSecurity cautions Other information For best performanceImportant Information Part names and functions LED indicatorConnections Power failure Wi-FisettingsDownloading the Home Network app AC adaptor connectionInitial setup for iPhone, iPad Initial setupInitial setup for Android devices Start the Home Network app Tap Set up the HubRegistering another mobile device Information about Wi-Fi communicationRegistering other devices to the hub Tap Add Mobile DeviceUsing the app Using registration buttonsAccessing the User’s Guide Wireless communication range DectWall mounting Removing the wall mounting adaptor Open source software notice Software information SpecificationsFCC and other information FCC RF Exposure Warning Or, contact us via the web at Customer servicesFor hearing or speech impaired TTY users, TTY Or, send your request by E-mail toLimited Warranty Coverage Warranty For United States and Puerto RicoMail-In Service--Online Online Repair Request When you ship the product Limited Warranty Limits And ExclusionsFor your future reference If your product is not working properly