Panasonic KX-HNB600 setup guide About this system, For your safety

Page 6

Important Information

About this system

This system is an auxiliary system; it is not designed to provide complete protection from property loss. Panasonic will not be held responsible in the event that property loss occurs while this system is in operation.

For your safety

To prevent severe injury and loss of life/ property, read this section carefully before using the product to ensure proper and safe operation of your product.

WARNING

Power connection

RUse only the power source marked on the product.

RDo not overload power outlets and extension cords. This can result in the risk of fire or electric shock.

RCompletely insert the AC adaptor/power plug into the power outlet. Failure to do so may cause electric shock and/or excessive heat resulting in a fire.

RRegularly remove any dust, etc. from the AC adaptor/power plug by pulling it from the power outlet, then wiping with a dry cloth. Accumulated dust may cause an insulation defect from moisture, etc. resulting in a fire.

RUnplug the product from power outlets if it emits smoke, an abnormal smell, or makes an unusual noise. These conditions can cause fire or electric shock. Confirm that smoke has stopped emitting and contact us at www.panasonic.com/contactinfo

RUnplug from power outlets and never touch the inside of the product if its casing has been broken open. Danger of electric shock exists.

RNever touch the plug with wet hands. Danger of electric shock exists.

RDo not connect non-specified devices.

Installation

RTo prevent the risk of fire or electrical shock, do not expose the product to rain or any type of moisture.

RDo not place or use this product near automatically controlled devices such as automatic doors and fire alarms. Radio waves emitted from this product may cause such devices to malfunction resulting in an accident.

RDo not allow the AC adaptor or telephone line cord to be excessively pulled, bent or placed under heavy objects.

RKeep small parts, such as microSD cards, out of the reach of children. There is a risk of swallowing. In the event they are swallowed, seek medical advice immediately.

Operating safeguards

RUnplug the product from power outlets before cleaning. Do not use liquid or aerosol cleaners.

RDo not disassemble the product.

RDo not spill liquids (detergents, cleansers, etc.) onto the telephone line cord plug, or allow it to become wet at all. This may cause a fire. If the telephone line cord plug becomes wet, immediately pull it from the telephone wall jack, and do not use.

RNever put metal objects inside the product. If metal objects enter the product, turn off the circuit breaker and contact an authorized service center.

Medical

RConsult the manufacturer of any personal medical devices, such as pacemakers or hearing aids, to determine if they are adequately shielded from external RF (radio frequency) energy. DECT features operate between 1.92 GHz and 1.93 GHz with a peak transmission power of 115 mW. Wi-Fi features operate between 2.412 GHz and 2.462 GHz with a peak transmission power of 100 mW.

RDo not use the product in health care facilities if any regulations posted in the area instruct you not to do so. Hospitals or health care facilities may be using

6

For assistance, please visit www.panasonic.com/support

Image 6
Contents Home Network System Thank you for purchasing a Panasonic productTable of Contents Additional accessories Accessory informationSupplied accessories Other informationExpanding the Panasonic Home Network System Mobile devices Smart Plug KX-HNA101 50 max.*3Your mobile devices 8 max For your safety About this systemImportant safety instructions Installation and locationSecurity cautions For best performance Other informationImportant Information LED indicator Part names and functionsConnections Downloading the Home Network app Wi-FisettingsPower failure AC adaptor connectionInitial setup for Android devices Initial setupInitial setup for iPhone, iPad Start the Home Network app Tap Set up the HubRegistering other devices to the hub Information about Wi-Fi communicationRegistering another mobile device Tap Add Mobile DeviceUsing registration buttons Using the appWireless communication range Dect Accessing the User’s GuideWall mounting Removing the wall mounting adaptor Specifications Open source software notice Software informationFCC and other information FCC RF Exposure Warning For hearing or speech impaired TTY users, TTY Customer servicesOr, contact us via the web at Or, send your request by E-mail toWarranty For United States and Puerto Rico Limited Warranty CoverageMail-In Service--Online Online Repair Request Limited Warranty Limits And Exclusions When you ship the productIf your product is not working properly For your future reference