Panasonic KX-HNB600 setup guide Using registration buttons, Using the app

Page 14

Setup

Using registration buttons

1Hub:

Press and hold the registration button until the LED indicator blinks in green. R Press and hold the appropriate

registration button (page 10) according to the device you want to register.

M HANDSET/LOCATORN: For handsets

M CAMERAN: For cameras

M OTHER DEVICEN: For sensors and smart plugs

2Handset:

Place the handset on the charger.

Devices other than handset:

Press and hold the device’s registration button until the device’s LED indicator blinks in green.

R When registration is complete, the hub sounds one long beep.

Note:

RIf registration fails, the hub sounds several short beeps.

Using the app

1Start the [Home Network] app.

2From the [Home Network] app home screen, tap [Settings].

3Tap [Device Registration].

4 Tap [Registration].

5Select the type of device that you want to register.

6Handset:

Place the handset on the charger.

Devices other than handset:

Press and hold the registration button on the device you want to register until the device’s LED indicator blinks in green.

R When registration is complete, the hub sounds one long beep.

7When prompted, configure the device name and location as desired, and then tap [OK].

Note:

RIf registration fails, the hub sounds several short beeps.

14For assistance, please visit www.panasonic.com/support

Image 14
Contents Home Network System Thank you for purchasing a Panasonic productTable of Contents Additional accessories Accessory informationSupplied accessories Other informationExpanding the Panasonic Home Network System Your mobile devices 8 max Mobile devicesSmart Plug KX-HNA101 50 max.*3 For your safety About this systemSecurity cautions Important safety instructionsInstallation and location For best performance Other informationImportant Information Connections LED indicatorPart names and functions Downloading the Home Network app Wi-FisettingsPower failure AC adaptor connectionInitial setup for Android devices Initial setupInitial setup for iPhone, iPad Start the Home Network app Tap Set up the HubRegistering other devices to the hub Information about Wi-Fi communicationRegistering another mobile device Tap Add Mobile DeviceUsing registration buttons Using the appWireless communication range Dect Accessing the User’s GuideWall mounting Removing the wall mounting adaptor Specifications Open source software notice Software informationFCC and other information FCC RF Exposure Warning For hearing or speech impaired TTY users, TTY Customer servicesOr, contact us via the web at Or, send your request by E-mail toMail-In Service--Online Online Repair Request Warranty For United States and Puerto RicoLimited Warranty Coverage Limited Warranty Limits And Exclusions When you ship the productIf your product is not working properly For your future reference