Battery Indicator
The red indicator lights. | The battery level is low. Save your data and power off your computer. | |
Repeated beeping sound | After connecting the AC adaptor or replacing the battery pack with a fully charged one, turn | |
while the computer is in use. | your computer on. |
|
The red indicator blinks | The battery pack or recharging function may be defective. Quickly remove the battery | |
| pack and disconnect the AC adaptor, then connect them again. |
|
| If the problem persists, contact Panasonic Technical Support. |
|
The orange indicator blinks | Unable to charge because of an improper temperature range. ( | page 6) |
|
|
|
Reference Manual
The Reference Manual is | Is Acrobat Reader installed? |
not displayed | If Acrobat Reader is not installed, run [c:\util\reader\ar500enu.exe] in [Start] - [Run] to |
| reinstall the program. When installing the program, do not change the installation destina- |
| tion folder. If the destination folder is changed, the Reference Manual cannot be opened |
| from the [Start] menu. |
Shutting down |
|
Windows cannot be shut down or restarted
Do not shut down Windows during music playback.
If a USB device is connected, try removing it.
Was an attempt made to shut down (or restart) Windows while the computer was con- nected to a network drive using a LAN?
With the following procedure, shut down (or restart) Windows after disconnecting the network drive.
1Windows 2000
Select [My Computer] on the Desktop with the right button of the touch pad and then select [Disconnect Network Drive].
Windows XP
Select [Start] - [My Computer] and then select [Tools] - [Disconnect Network Drive].
2Select all of the displayed network drives, then select [OK].
Others
Computer hangs
Press Ctrl + Shift + Esc to open Task Manager and close the software application which is not responding.
After shutting down by rotating the power switch for more than four seconds, rotate the power switch to power on and open the application again.
If the program no longer works normally, delete the program using the following menu. Then reinstall the program.
Windows 2000 : [Control Panel] - [Add/Remove Programs]
Windows XP : [Control Panel] - [Add or Remove Programs]
Troubleshooting
Fast User Switching function Windows XP
Some applications may not work properly
When switching to a different user with the Fast User Switching function, the following problems may occur.
•Some applications may not work properly (for example, PDF files may not be printed properly).
•Key combinations with the Fn key may not work.
•It may not be possible to set the settings of the display.
•A serial mouse may not work.
If any of the above occur, log on with the administrator authority again, not using the Fast User Switching function, and try the operation once more.
23