Panasonic CF-28 Series operating instructions List of Error Codes

Page 20

List of Error Codes

02F5: DMA Test Failed

ServerBIOS2 test error: Cannot write to extended DMA (Direct Memory Access) registers.

02F6: Software NMI Failed

ServerBIOS2 test error: Cannot generate software NMI (Non-Maskable Interrupt).

02F7: Fail - Safe Timer NMI Failed

ServerBIOS2 test error: Fail-Safe Timer takes too long.

device address Conflict

Address conflict for specified device.

Allocation Error for: device

Run ISA or EISA Configuration Utility to resolve resource conflict for the specified device.

Failing Bits : nnnn

The hex number nnnn is a map of the bits at the RAM address which failed the memory test. Each 1 (one) in the map indicates a failed bit. See error 230,231 or 232 for offset address of the failure in System, Extended or Shadow memory.

Invalid System Configuration Data

Problem with NVRAM (CMOS) data.

I/O device IRQ conflict

I/O device IRQ conflict error.

Operating System not found

Operating system cannot be located on either drive A: or drive C:. Enter Setup and see if fixed disk and drive A: are properly identified.

Parity Check 1 nnnn

Parity error found in the system bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????. Parity is a method for checking errors in binary data. A parity error indicates that some data has been corrupted.

Parity Check 2 nnnn

Parity error found in the I/O bus. BIOS attempts to locate the address and display it on the screen. If it cannot locate the address, it displays ????.

Press <F1> to resume, <F2> to Setup

Displayed after any recoverable error message. Press <F1> to start the boot process or <F2> to enter a Setup and change the settings. Write down and follow the information shown on the screen.

Troubleshooting

20

Image 20

Contents Operating Instructions CF-28 SeriesIntroduction Illustrations and Terminology in this ManualCopyright Disclaimer TrademarksRead Me First For U.S.AIndustry Canada IC Notice for modem Read Me FirstFor Canada Lithium Battery PrecautionsPeripherals CablesPrecautions Battery Pack When Using Peripheral DevicesWhen Disposing of or Transferring Ownership of This Device Saving Data on the Hard DiskSaving Data on Floppy Disks Computer VirusesMaintenance Usage EnvironmentHandling Touch Pad Areas excluding the displayConfirm the inclusion of all parts Insert the battery packFirst-time Operation Connect your computer to a power outlet Power Indicator Power SwitchFirst-time Operation Open the displaySetup Windows Select the Operating SystemOnly for models with 13.3 type LCD Only for models with touchscreenResetting the password This concludes the first-time use operation guidelinesCreate Backup Disks for Reinstallation Eject ButtonIf security indicator is displayed Starting Up/Shutting DownStarting Up Will StartLog on to Windows Select your applicationShutting Down power off your computer Starting Up/Shutting DownConfirm shut down Restarting your computer without shutting downTouch Pad Basic Operation Work SurfaceMove the tip of your finger lightly over SurfaceReference Manual List of Error Codes List of Error Codes Dealing with Problems Summary Starting UpShift Dealing with Problems SummaryDisplay Battery Indicator Fast User Switching function Windows XPReference Manual Shutting downReinstalling Software Before ReinstallationReinstalling PreparingCtrl + Alt + Del Limited USE License Agreement Termes, clauses et conditions Contrat de licence d’usage limitéLicence Names and Functions of Parts Microphone Jack External Keyboard/Mouse Port USB PortHeadphone Jack Hard Disk DriveSpecifications Main SpecificationsPhysical Dimensions W x H x D SoftwareLimited Warranty Panasonic Computer and Peripherals Limited Warranty Memo Page Panasonic Computer Solutions Company Panasonic Canada Inc