Panasonic PT-AE3000U manual Switching the projector on/off, Power cord, Connecting

Page 19

Switching the projector on/off

Power cord

Connecting

Disconnecting

1.Make sure the shape of the power plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the power cord from the wall outlet.

2.Depress the latch and slide the cover off.

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the power cord from the AC IN terminal on the back of the projector.

Latch

4. Connect the power cord to a wall outlet.

NOTE:

•Do not use other than the provided power cord.

•Ensure all the input devices are connected and turned off before connecting the power cord.

•Do not force the connector as this may damage the projector and/or the power cord.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

Basic Operation

ENGLISH - 19

Image 19

Contents Operating Instructions Dear Panasonic Customer Important Safety NoticePanasonic Important Safety NoticeDeclaration of Conformity Model Number PT-AE3000U Trade NameContents Lens Control ContentsMenu Navigation Picture menuPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesLiquid crystal panel Projector may be subject to electromagnetic interferenceOrder to get the best picture quality Do not touch the surfaces of the lens with your bare handsPower cord secure lock AccessoriesRemote control for Safety cable Lens cover Power cordAbout Your Projector Remote controlAbout Your Projector Projector bodyTop and front view Component About Your Projector Back and bottom viewComputer HdmiCalculation methods for screen dimensions Setting upScreen size and throw distance Mounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift dialsLens shift and positioning Horizontal shift100% Setting up Projector location rangeWhen the screen position is fixed When the projector position is fixedConnections Before connecting to the projectorConnecting example Component IN/S-VIDEO Connecting example Hdmi IN/COMPUTERConnect the power cord to a wall outlet Switching the projector on/offPower cord ConnectingSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switching off the projector Switching on the projectorPress the power or Enter button Projecting an image Selecting the input signalSwitch on the connected devices Adjust the focus and the projected image sizeAdjusting the image Remote control operationManaging the lens control settings Switching the picture modeRemote control operation Loading a saved settingSwitching the aspect ratio Adjusting the signal condition with a waveformContrast G/CONTRAST B Adjustment exampleAdjusting with luminance options Adjusting with RGB optionsManaging stored logs Setting your own color profileAdjusting the selected color Create a new profileLoading saved profiles Saving a log setting as a profileDeleting the saved profiles Changing the profile namesCapturing an image Resetting to the factory default settingsSwitching the input signal Using the assigned function as shortcutDisplaying the main menu Adjusting with the bar scale itemsMenu Navigation Navigating through the MenuMenu Navigation Main menu and sub-menuLanguage Lens Control Picture menu Waveform Monitor Color TemperatureSplit Adjust Dynamic IrisNR Noise Reduction Adjusting the image in a split windowStandard xvYCC ColorMemory Edit Signal ModeMemory Save Memory LoadDOT Clock Clock PhasePosition menu PositionFIT Component signalsPosition menu Aspect ratio options and projection example ZoomKeystone Auto SetupWSS Over ScanLens Memory Save Adjust ZOOM/FOCUS, H-AREA PositionZOOM/FOCUS Lens Memory LoadSelect Lens Memory Name Change and press the Enter button You can edit named lens memory settingsLens Memory Edit Area PositionAssignable functions Underlined item is factory default settingButton Blank functionOption menu Sleep InstallationHigh Altitude Mode Lamp PowerTemp indicator Temp and Lamp IndicatorsManaging the indicated problems Lamp indicatorCleaning the projector Care and ReplacementBefore replacing the lamp unit Care and ReplacementWhen to replace the lamp unit Replacing the lamp unitResetting the Lamp Runtime Care and Replacement Removing and replacing the lamp unitAttaching the top cover Troubleshooting Dots *1 MHz KHz List of compatible signalsTechnical Information Quality *2Serial terminal Control commands Technical Information Communication settingsInquiry commands Specifications Hdmi VideoComputer ComponentInstalling the safety cable Ceiling mount bracket safeguardsLoop twice Loop once Trademark acknowledgements DimensionsUnit mm Index Index

Related manuals

Manual 60 pages 29.63 Kb