Panasonic PT-AE3000U manual Color Temperature, Dynamic Iris, Waveform Monitor, Split Adjust

Page 33

PICTURE menu

 

MONITOR POSITION

COLOR TEMPERATURE

When the FULL SCAN is selected, press F G I

You can adjust the white balance of the projected image. H to adjust the position of the monitor.

Less

More

bluish

bluish

Setting range: -6 to +6

DYNAMIC IRIS

You can switch automatic adjustment of the lamp and the lens iris on/off.

ON:

Automatic adjustment

OFF:

No adjustment

WAVEFORM MONITOR

You can monitor whether or not the luminance level of the input signal is in the recommended range by displaying it in the waveform monitor. If the waveform is not in the range, adjust it for the best quality. See “Adjusting the signal condition with a waveform” on page 24.

OFF

FULL SCAN(Y)

FULL SCAN(R)

FULL SCAN(G)

FULL SCAN(B)

SINGLE LINE SCAN(Y)

SINGLE LINE SCAN(R)

SINGLE LINE SCAN(G)

SINGLE LINE SCAN(B)

MONITOR POSITION UPPER LEFT

AUTO ADJUST

1.Press F G to move to the required waveform style.

2.Press ENTER to select.

The WAVEFORM MONITOR will be displayed. See “Adjusting the signal condition with a waveform” on page 24.

NOTE:

•When the WAVEFORM MONITOR is set to OFF, the AUTO ADJUST is not displayed.

•The waveform of the WAVEFORM MONITOR will not be displayed correctly with a noisy equipment or source.

•The WAVEFORM MONITOR adjusts the signal level based on the reference signal which consists of 0% and 100%. The over scanned reference signal which runs off the edge of the screen, below 0% or over 100% signal level will not be adjusted correctly.

See “Adjusting the signal condition with a waveform” on page 24.

AUTO ADJUST

You can switch on/off the automatic adjustment system in each items.

BLACK LEVEL ADJUST

ON

Adjust the black level of luminance (Y) to 0%.

 

WHITE LEVEL ADJUST

 

Adjust the white level of luminance (Y) to

ON

100%.

 

RGB ADJUST (BLACK)

OFF

Adjust the black level of colors (R/G/B) to 0%.

 

RGB ADJUST (WHITE)

 

Adjust the white level of colors (R/G/B) to

OFF

100%.

 

1.Press F G and select the required item.

2.Press I H and switch on/off.

3.Press F G and select START AUTO ADJUST and press the ENTER button.

The confirmation screen will be displayed.

4.Press I H and select OK.

5.Press the ENTER button.

SPLIT ADJUST

You can perform image adjustment for some PICTURE menu items while displaying a certain area of the frozen image in a split window.

SPLIT ADJUST MODE

Select the required split style from NORMAL and REVERSE in the SPLIT ADJUST MODE menu.

NORMAL

REVERSE

Settings

ENGLISH - 33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Operating Instructions Dear Panasonic Customer Important Safety NoticeDeclaration of Conformity Important Safety NoticeModel Number PT-AE3000U Trade Name PanasonicContents Menu Navigation ContentsPicture menu Lens ControlPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Do not put your weight on this projector Remove the used batteries from the remote control promptlyUse only the specified batteries Do not mix old and new batteriesOrder to get the best picture quality Projector may be subject to electromagnetic interferenceDo not touch the surfaces of the lens with your bare hands Liquid crystal panelRemote control for Safety cable Lens cover AccessoriesPower cord Power cord secure lockAbout Your Projector Remote controlProjector body About Your ProjectorTop and front view Computer About Your Projector Back and bottom viewHdmi ComponentSetting up Calculation methods for screen dimensionsScreen size and throw distance Setting up Front leg adjusters and throwing angleProjection method Mounting on the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift dialsHorizontal shift Vertical shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed 100%Connecting example Component IN/S-VIDEO Before connecting to the projectorConnecting example Hdmi IN/COMPUTER ConnectionsPower cord Switching the projector on/offConnecting Connect the power cord to a wall outletPower indicator Switching the projector on/offPower indicator informs you the status of the power Switching on the projector Switching off the projectorPress the power or Enter button Switch on the connected devices Selecting the input signalAdjust the focus and the projected image size Projecting an imageManaging the lens control settings Remote control operationSwitching the picture mode Adjusting the imageSwitching the aspect ratio Loading a saved settingAdjusting the signal condition with a waveform Remote control operationAdjusting with luminance options Adjustment exampleAdjusting with RGB options Contrast G/CONTRAST BAdjusting the selected color Setting your own color profileCreate a new profile Managing stored logsDeleting the saved profiles Saving a log setting as a profileChanging the profile names Loading saved profilesSwitching the input signal Resetting to the factory default settingsUsing the assigned function as shortcut Capturing an imageMenu Navigation Adjusting with the bar scale itemsNavigating through the Menu Displaying the main menuMenu Navigation Main menu and sub-menuLanguage Lens Control Picture menu Split Adjust Color TemperatureDynamic Iris Waveform MonitorNR Noise Reduction Adjusting the image in a split windowStandard xvYCC ColorMemory Save Signal ModeMemory Load Memory EditPosition menu Clock PhasePosition DOT ClockPosition menu Aspect ratio options and projection example Component signalsZoom FITWSS Auto SetupOver Scan KeystoneZOOM/FOCUS Adjust ZOOM/FOCUS, H-AREA PositionLens Memory Load Lens Memory SaveLens Memory Edit You can edit named lens memory settingsArea Position Select Lens Memory Name Change and press the Enter buttonButton Underlined item is factory default settingBlank function Assignable functionsOption menu High Altitude Mode InstallationLamp Power SleepManaging the indicated problems Temp and Lamp IndicatorsLamp indicator Temp indicatorCleaning the projector Care and ReplacementWhen to replace the lamp unit Care and ReplacementReplacing the lamp unit Before replacing the lamp unitCare and Replacement Removing and replacing the lamp unit Resetting the Lamp RuntimeAttaching the top cover Troubleshooting Technical Information List of compatible signalsQuality *2 Dots *1 MHz KHzSerial terminal Control commands Technical Information Communication settingsInquiry commands Specifications Computer VideoComponent HdmiCeiling mount bracket safeguards Installing the safety cableLoop twice Loop once Dimensions Trademark acknowledgementsUnit mm Index Index
Related manuals
Manual 60 pages 29.63 Kb
Top Page Image Contents