Panasonic PT-50LC13, PT-60LC13 manual Aspect Controls, Just Normal Zoom Full, Normal Full True

ASPECT Controls

The color monitor will allow you to enjoy viewing the picture at its maximum size, including wide screen cinema format picture.

The aspect mode changes each time the ASPECT button is pressed.

JUST

NORMAL

ZOOM

FULL

FULL

• When a 480p signal is being received, the mode switches between NORMAL, ZOOM, and FULL only.

NORMAL ZOOM FULL

• During PC input, the mode switches between NORMAL, FULL and TRUE only.

NORMAL FULL TRUE

•When XGA and Mac 19 signal is input, the aspect will be NORMAL and FULL only.

NORMAL FULL

Notes:

•When a 1080i or 720p signal is being received, the mode is set to FULL, and aspect switching is not possible.

•When input mode is CARD, the mode is set to NORMAL, and aspect switching is not possible.

Notes:

•However, if the mode selected does not match the aspect ratio of the input signal, the original picture quality may be affected.

•If using this projection display in places, such as cafes or hotels, with the aim of displaying programs for a commercial purpose or for public presentation, please note that by using the aspect ratio (16:9) selection function to change the aspect ratio, you may be infringing on the rights of the original copyright owner of that program under copyright protection laws.

•If a normal (4:3) picture is projected in wide screen, distortion may occur around the edges so that part of the picture may no longer be visible. We recommend viewing in 4:3 mode so you can enjoy the picture as it was intended to be seen.

32 For assistance, please call : 1-888-VIEW PTV(843-9788)