Panasonic PT-50LC13, PT-60LC13 manual Troubleshooting, Symptoms Checks

Page 76

Troubleshooting

Before you call for service, determine the symptoms and make a few simple checks as shown below.

Symptoms

 

Checks

Page

Power does not turn ON.

Is the power plug plugged in?

22-23

No picture. (Lamp does not light up.)

If the Lamp will not light after turning on the power 2 or 3 times, the

68

 

Lamp may be damaged. Please consult your nearest dealer.

 

 

 

 

 

The POWER indicator

 

 

 

 

flashes orange twice

The lamp cover is ajar. Firmly replace the cover.

-

 

every 5 seconds.

 

 

 

 

The TEMP indicator

Check whether or not the vents are clogged.

-

 

flashes 2 or 4 times

Is the set being used in a location that is hot?

-

The power turns

every 5 seconds.

 

 

 

OFF.

The TEMP indicator

 

 

 

 

flashes 5 times every 5

Please consult your nearest dealer.

-

 

seconds.

 

 

 

 

Power turns off while

 

 

 

 

another indicator is

Please consult your nearest dealer.

-

 

flashing.

 

 

 

 

 

Are the batteries dead or inserted incorrectly?

7

Remote control does not function.

Is the remote control sensor in direct light of fluorescent lamps or

-

 

other strong sources of light?

 

 

 

 

 

 

Did you correctly set the remote control code?

69

Image shakes.

 

Is the antenna or antenna cable old, broken or shorted?

-

 

 

Is the antenna cable connected properly?

12-14

Image is not clear.

 

Sudden changes in ambient temperature may cause condensation

 

 

 

in the internal optics. Condensation should disappear after Power

-

 

 

 

 

 

 

has been ON for a while.

 

 

 

 

 

 

Color patches or no color.

When using a VCR and selecting channels on the TV, is the

-

 

TV/VIDEO mode for the VCR set to TV?

 

 

 

 

Image appears doubled or tripled.

Is the antenna facing the right direction?

-

Is the antenna receiving any signals reflected off of mountains or

-

 

 

 

buildings.

 

 

 

 

Images disappear at the top and bottom of

When using 16:9 image software, there is no picture at the top and

-

the screen.

 

 

bottom of the screen (cinema vision size software, etc.).

 

 

 

During ZOOM modes, the image is cut off at

Has the screen position been changed? If so, adjust screen

32-33,

the top and bottom.

 

 

positioning.

42-43

Some parts of the screen are always lit while

 

 

 

others do not light up.

This is a characteristic of the LCD panel and not a malfunction.

-

Some parts of the screen do not light up.

 

 

 

Fan is operating even though TV Power is

This is because the cooling fan is operating. The fan will stop after

23

OFF.

 

 

about 1 minute.

 

 

 

An OSD instructing to replace the lamp is

Replace lamp with a new one.

68

displayed. (The LAMP indicator is lit red.)

 

 

 

Relighting the lamp when it is hot makes a

This is a characteristic of the lamp and not a malfunction.

-

sound.

 

 

 

 

 

Leaving stationary images, such as still video

 

 

 

images, web pages, or filler bars (used for

This is a characteristic of the LCD panel and not a malfunction. Try

 

NORMAL aspect mode), on-screen for an

 

displaying constantly moving pictures which fill the entire screen, or

-

extended period of time can leave ghost

 

turn the power OFF for a while to return the screen to normal.

 

images on the screen.

 

 

 

An OSD advising “AIR FILTER CLEANING...”

Please consult your nearest dealer.

-

is displayed.

 

 

 

 

 

 

 

 

 

76

For assistance, please call : 1-888-VIEW PTV(843-9788)

 

Image 76
Contents For assistance, please call Multimedia Projection Display Operating InstructionsUSA Keep these instructions for future reference Follow all instructions carefullyTrademarks For assistance, please call 1-888-VIEW PTV843-9788 Or send e-mail to consumerproducts@panasonic.comDeclaration of Conformity Models NumberTable of Contents Before Using Safety PrecautionReceiver Location Optional External EquipmentAccessories Remote Control Battery InstallationBefore Using Observe the following precautionsIlluminated Remote Control Location of ControlsLocation of Controls Controls and Terminals on the projection display Model PT-50LC13 unit shownVent Connecting the Antenna / Cable to the RF in Terminal No VCR InstallationAntenna Connection Installation Cable ConnectionConnecting the Antenna / Cable to the RF in Terminal VCR How to connect the 1, 2, 3 Input Terminals Connects VCRs and other peripheral equipmentComponent Signals Y, PB, PR that can be Input Signal data Information menu Mode type No. of dotsVertical frequency DisplayHow to connect the AV Out Terminals How to connect the RGB in Terminals Connecting a PC to RGBPin No Signal name NC Not connected Pin No Signal nameConnecting a DTV Decoder to RGB Audio cable RGB cable D-SUB 15PHow to connect the Digital in Terminal Connecting a DTV Decoder to DigitalDigital in Terminal Pin Layouts GNDRGB/DIGITAL in signals that can be input SignalsDTV Format Signals ComputerPower on and OFF Initial SetupIf using Cable Box, DSS Receiver, or VCR When setup is complete, the lowest channel picture appearsTurning the Power on and OFF Power on / OFFPower on Power OFFFlow Chart of Main menu Select Menu desired byAdjust items Set an item Select an item Flow Chart of Main menuReturning to the previous screen Automatic channel setting Tuning channelsOn the next Tuning channels When setup is complete, the lowest channel pictureAppears Press to exit menuManual channel setting Press to select TV or CableManual SET Press to display the Manual SET screenTo add channel To delete channelPress to select channel Press to add channels to memoryPress to Select Desired Volume Level Projection display operationOperation can be done from the projection display Desired Channel. Or use Number keysUsing the number keys Projection display operationTV status display Auto shut offAspect Controls Just Normal Zoom FullNormal Zoom Full Normal Full TrueMode Picture Explanation Normal will display a 43 picture at itsStandard 43 size JustWhen a channel button is pressed during channel search Channel up and down buttonsTurning the power on and switching input modes Playing peripheral equipmentConfirming connections Video Component Card Digital RGBSound mute Mute / Freeze / SAPFreezing pictures Select Audio Mode for TV Viewing Mute / Freeze / SAPReceivable Broadcast Types SAPSplit screen Splitting the screenSelecting the screen aspect for split screen Press to returnSplit screen Changing the channel of the right screenSwapping left and right screens VideoPicture in Picture PIP Screen Display PIP screenPicture in Picture PIP Screen Changing the channel of the PIP screenMove PIP screen You can move the PIP screen to four positionsAdjust Adjusting screen position and sizePOSITION/SIZE Adjusting screen position and size PhaseEnlarge Shrink Widen NarrowAudio Audio AdjustmentsNormal Auto Cinema Music Speech Audio Adjustments Using BBEBass TreblePicture Adjustments PictureDynamic WarmPicture Adjustments Lock Feature Or OrEnter Secret Code LockLock Feature Setup US Movies RatingsPerform Enter Secret Code on View NR Not RatedSetup US TV Programs Ratings Perform US Movies Ratings onUS TV ProgramsGeneral Audience Parental Guidance SuggestedParents Cautioned RestrictedCaption Mode Text C1 or C2 Caption Mode OFFClosed Captions No OFF CAP C1 Text C1 CAP C2 Text C2Closed Captions CC on MutePress repeatedly to select No OFF CAP C1 CAP C2Channel Caption Feature Channel CaptionWeak Signal Display Feature DisplayVideo NR Noise Reduction Feature VideoPress to display the Video screen Video NRAutomatically changing screen size RGB/DIGITAL in Input Feature RGBDigital VGA3D Y/C Feature 3D IP FeatureOFF Set to OFF if picture appearsSleep Timer Feature Sleep TimerOther OFFSwitching languages for display InformationEnglish Español Français InformationDemo Mode Demo Mode FeaturePress to display the Other screen Card Data Protection Jpeg Viewer SD Card/PC CardFolders and Files Jpeg Viewer SD Card/PC Card Insert the CardRemove the Card Card Menu ScreenIndex Area Operation Menu Area OperationReturn Operation Single Play Mode Press to display next/previous page of 9 thumbnail filesPress Action to display file in full screen size Press Left column of nextSlide Show Mode Picture AdjustmentInformation Screen Display FromReplacing the lamp unit Lamp unit replacement periodLamp has a maximum life of about 10 000 hours VCR CBLDBS RcvrInfrared Remote Codes for Specific Components When code is not knownCable Maker Set Up No VCR Infrared Codes IndexMaker List CBL Maker List Personal Video Recorders Mode Function Quick Reference Functional Button ChartButton Button Mode Function Troubleshooting Symptoms ChecksSpecifications PT-50LC13 PT-60LC13Cleaning Customer Services DirectoryPanasonic Multimedia Projection Display Limited Warranty Limited WarrantyCategory Parts Labor Service Power button/POWER indicator 10, 23 IndexChannel up / down buttons projection display Customer’ Record
Related manuals
Manual 80 pages 35.34 Kb Manual 46 pages 37.12 Kb