Panasonic PT-60LC13, PT-50LC13 manual Vcr, Cbl, Dbs, Rcvr, Aux, Dvd, Dtv

Remote Control Quick Reference Guide (Operating peripheral equipment)

Programming The Illuminated Remote Control Using Access Codes

The remote control can be preset for other manufacturers, by utilizing the REMOTE MODE SELECTION BUTTONS for CABLE, DTV, VCR, RCVR (a Receiver or Amplifier), DVD (DVD or CD), DBS and AUX (for Cassette Player or a PVR.) Details on remote control buttons to operate peripheral equipment. (PP. 74-75)

Setting up the remote using the numerical keys.

(When code is known):

1	Press and hold the POWER and ACTION
	buttons simultaneously for at least 5 seconds.
	After 5 seconds, all the illuminated mode
	buttons will begin to flash. Then let go of the
	POWER and ACTION buttons.

+

2	Press the desired mode button.
	The mode button will illuminate steadily, all
	others will go out.
3	Enter the three digit set up code, by using the
	Remote Control Keyboard.
	If the correct code is entered, the mode button will
	blink twice and then go out.
	Now your remote is set for this code.
	Then, press the Remote Control POWER button to
	test the component. If the procedure was
	successful, the component will turn on.
Device	Operate	Default
TV	TV (Only Panasonic)	Panasonic Code
VCR	VCR (Preset)	Panasonic Code
CBL	Cable Boxes (Preset)	Panasonic Code
DBS	DBS Boxes (Preset)	Panasonic Code
RCVR	RCVR (Preset)	Panasonic Code
AUX	Cassette Players, PVR (Preset)	Panasonic Cassette Players Code
DVD	DVD & LD & CD Player (Preset)	Panasonic DVD Code
DTV	STB (Only Panasonic)	Panasonic Code

Notes:

•Due to changes in infra-red commands used by manufacturers, some brands have several codes. If your unit does not respond to the first code, please try the next one.

•If an incorrect number is entered (or there is an incomplete entry after 30 seconds), the button illumination goes out (no blink) and settings are unchanged.

•Repeat setup after remote battery replacement.

•Remote will not control every component made by the manufacturer listed.

If you get no response, your particular component cannot be controlled. There are NO additional codes for the products listed. If your product is not listed, then the remote is not compatible with that product.

Information

69