Technical Information
STATUS
Projector status
Click the Projector status tab on the top.
PROJECTOR TYPE | Displays the type of projector. | |
MAIN VERSION | Displays the firmware version of the | |
projector main unit. | ||
| ||
INPUT | Displays the input switching status. | |
INPUT AIR | Displays temperature of projector’s | |
TEMPERATURE | intake air. | |
OPTICS MODULE | Displays temperature inside the | |
TEMPERATURE | projector. | |
AROUND LAMP | Displays temperature around lamp | |
TEMPERATURE | units. | |
LAMP1 RUNTIME/LAMP2 | Displays the lamp lit hours. | |
RUNTIME | ||
| ||
PROJECTOR RUNTIME | Displays used hours of the projector. | |
SELF TEST | Displays self diagnosis information. |
Error information
When Error (Detail) is displayed in SELF TEST in the status list, click (Detail) to display the error details.
Click (Detail)
Parameter | Description | |
|
| |
| Trouble has occurred in the | |
MAIN CPU BUS | microcomputer circuitry. Consult your | |
| dealer. | |
FAN | Trouble has occurred in the fan or its | |
drive circuit. Consult your dealer. | ||
| ||
| The input air temperature is too high. It | |
INPUT AIR | may be that the projector is being used | |
in an operating environment where the | ||
TEMPERATURE | ||
temperature is high such as near a | ||
| ||
| heating appliance. | |
| The temperature inside the projector is | |
OPTICS MODULE | high. It may be that the projector is | |
being used in an operating | ||
TEMPERATURE | ||
environment where the temperature is | ||
| ||
| high such as near a heating appliance. | |
AROUND LAMP | The temperature around the lamp is | |
too high. It may be that the projector’s | ||
TEMPERATURE | ||
ventilation holes are blocked. | ||
| ||
LAMP1 REMAIN TIME | The lamp runtime has exceeded the | |
LAMP2 REMAIN TIME | prescribed cumulative time, and it is | |
now time to replace the lamp. | ||
LAMP1 STATUS | The lamp has failed to light. Wait a | |
LAMP2 STATUS | short while for the lamp to cool off, and | |
then turn on the power. | ||
SHUTTER | Trouble has occurred in the shutter | |
circuitry. Consult your dealer. | ||
| ||
| Trouble has occurred in the sensor | |
INPUT AIR TEMP.SENSOR | used to detect the input air | |
| temperature. Consult your dealer. | |
OPTICS MODULE | Trouble has occurred in the | |
temperature detection sensor inside | ||
TEMP.SENSOR | ||
the projector. Consult your dealer. | ||
| ||
AROUND LAMP | Trouble has occurred in the sensor | |
used to detect the exhaust air | ||
TEMP.SENSOR | ||
temperature. Consult your dealer. | ||
| ||
BATTERY | The backup battery has been run out. | |
Consult your dealer. | ||
| ||
| Trouble has occurred in the sensor | |
AIRFLOW SENSOR | used to detect the airflow volume. | |
| Consult your dealer. | |
| Trouble has occured in the colour | |
COLOR WHEEL | wheel or colour wheel or its drive | |
| circuit. Consult your dealer. | |
| The lamp unit cover is not attached | |
COVER OPEN | securely. Check the lamp unit | |
| compartment. | |
| The air cleaning filter (ACF) is not | |
ACF UNIT | installed or trouble has occurred. See | |
the operating instructions booklet that | ||
| ||
| is provided with the projector. | |
| The filter remaining is getting less. See | |
FILTER REMAIN | the operating instructions booklet that | |
| is provided with the projector. | |
|
|
Appendix
ENGLISH - 43