Panasonic PT-DZ6710E, PT-D5000E, PT-DW6300E, PT-D6000E manual  Side views, About Your Projector

Page 13

Side views

S-VIDEO IN

Connect an S-VIDEO signals. (Mini DIN 4 pin)

VIDEO IN

Connect a video signals. (BNC)

LAN

Connect a LAN cable for network connection.

(RJ-45)

About Your Projector

RGB 1 IN

Connect an RGB or YPBPR signals. (3, 4 or 5 wire BNC)

RGB 2 IN

Connect an RGB or YPBPR signals. (D-SUB 15 pin female)

DVI-D IN

Preparation

Connect a single link DVI-D signals.

(DVI-D 24 pin)

 

REMOTE 1 IN/OUT When two or more main units are used in the system, they can be connected and controlled with wired remote control cable.

(M3 jack)

REMOTE 2

Connect a cable from an external control circuit. (D-sub 9 pin female)

SERIAL IN/SERIAL OUT Connect an RS-232C cable from/to a computer.

SDI IN (PT-DZ6710E only) Connect a cable from a computer.

(BNC)

Air intake port

POWER button

Switch the projector on/off. (page 19)

Air intake port

AC IN terminal

Connect the main lead to supply electronic power to the projector. (page 19)

Security lock

Attach the commercial shackle lock, manufactured by Kensington, to protect your projector. Compatible with the Kensington MicroSaver Security System.

Auto Cleaning Filter (ACF) compartment (page 32)

NOTE:

•Switch on the POWER button of the projector body that is located near the terminals before using the control buttons.

•Do not touch the LAN terminal with your bare hands or body, as body parts may have charged static electricity. Failure to do so may cause malfunctions. Do not touch the metallic parts of LAN terminal and cable.

•Please connect the LAN to indoor devices only.

ENGLISH - 13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents PT-DZ6700E PT-DW6300E PT-D6000E PT-D5000E To rain or moisture Important Safety NoticeFor business users in the European Union Important Safety NoticeEnvironment care information for users in China Important the Moulded Plug U.K. only For Your SAFETY, Please Read the Following Text CarefullyContents Precautions with regard to safety Precautions with regard to safety Remove the used batteries from the remote control promptly Do not set up the projector outdoorsDo not put your weight on this projector Do not use chemical treated wipes when cleaningDo not reach for the openings beside the optical Replacement of the lamp unit should only be carriedBe sure to always remove the lens during transport Order to get the best picture qualitySecurity OthersAccessories Projector body About Your Projector Top, front and bottom view About Your Projector  Side viewsRemote control Number, and the remote control 2 digits ID number must When multiple projectors are connected as partBe set to match the intended projector. The default IN/OUT terminal. It is effective to use the wired remote Cautions when setting the projectors Setting upProjection method Over 10 cmRemoving and attaching the projection lens Setting up Removing the projection lens from the projector  Attaching the projection lens to the projectorMains lead  Connecting Adjusting focus, zoom and shift  Switching on the projectorPower switch AC in terminal Projecting Direct power off function Projecting  Switching off the projector Adjustment range after lens Position optical shift Setting up the image position automatically Remote control operationOperating range  Facing to the projectorStopping the projection Switching the input signalClearing the on-screen menu Changing the picture aspect ratioResetting to the factory default Using an assigned functionDisplaying the status of the projector Main menu and Sub-menu Menu NavigationPT-DZ6710E/PT-DZ6700E/PT-DW6300E only RS-232CSecurity Menu Navigation Operating procedure  Adjusting with the bar scale itemsNavigating through the menu  Displaying the Main menuManaging the indicated problems Monitor Lamp indicators LAMP1/LAMP2 indicator  Temp indicatorStatus in Projector Setup menu Monitor Lamp indicators  Filter indicatorStatus in Projector  When to replace the lamp unit ReplacementReplacing the Lamp unit  Before replacing the Lamp unitLamp unit cover fixing screw  Removing and replacing the lamp unitLamp u nit fixing screws HandleReplacing the Auto Cleaning Filter ACF Troubleshooting Technical Information List of compatible signalsPT-DZ6710E  Display dots of each modelPT-DZ6700E PT-DW6300ETechnical Information SpecificationsSerial  Attachment procedure Ceiling mount bracket safeguardsCeiling mount Trademark acknowledgements DimensionsUnit mm inch Index Index

PT-D6000E, PT-DW6300E, PT-D5000E, PT-DZ6700E, PT-DZ6710E specifications

Panasonic's line of professional projectors, including the PT-D6000E, PT-DZ6700E, PT-DW6300E, PT-DZ6710E, and PT-D5000E, represents a powerful combination of advanced technology and exceptional performance, designed for a wide range of applications, including large venues, auditoriums, and corporate events.

The PT-D6000E is known for its impressive 6000 lumens brightness, delivering vivid images even in well-lit environments. Its high-resolution WUXGA (1920 x 1200) display ensures sharp details and clarity, making it ideal for presentations and multimedia displays. The projector's Dual Lamp System provides redundancy and enhances reliability, ensuring uninterrupted operation. Additionally, its compact design makes it easy to install and transport.

The PT-DZ6700E offers even more power with an incredible 7000 lumens brightness. This model features 3LCD technology, which enhances color accuracy and ensures vibrant imagery. The high contrast ratio coupled with a vivid color reproduction process makes this projector perfect for events that require impactful visuals. The projector also supports various lens options, allowing for flexible installation in different environments.

For those seeking a cost-effective solution, the PT-DW6300E delivers 6000 lumens brightness paired with a WXGA (1280 x 800) resolution. This model is particularly suitable for educational settings and small-to-medium venues. It is also equipped with advanced cooling systems to manage heat effectively, extending operational life and maintaining optimal performance.

The PT-DZ6710E is an upgrade to the DZ6700E, boasting 8100 lumens brightness. This model retains the same 3LCD technology while featuring improved lens options and remote management capabilities, allowing users to control and monitor multiple units seamlessly. This is ideal for larger installations where multiple projectors are used for synchronized presentations.

Lastly, the PT-D5000E provides a robust solution for those requiring 5000 lumens brightness in a more compact package. With a 1024 x 768 resolution, this model is effective for a variety of applications, maintaining good image quality while offering a balance between performance and portability.

All these models incorporate features such as lens shift capability, multiple connectivity options, and 24/7 operation capabilities, making them versatile tools for any presentation need. With their high brightness, excellent color reproduction, and reliability, these Panasonic projectors are well-suited for demanding settings, providing outstanding value to users across various sectors.
Top Page Image Contents